Stihl MSA120 C-BQ (1254-011-5888) Инструкция по эксплуатации онлайн [16/127] 571947
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Stihl MSA120 C-BQ (1254-011-5888) Инструкция по эксплуатации онлайн [16/127] 571947

Stihl MSA120 C-BQ (1254-011-5888) Инструкция по эксплуатации онлайн [16/127] 571947
0458-716-8621-D
15
English
6 IMPORTANT SAFETY INSTRUCTIONS
– Place your left hand on the front handle and your
right hand on the rear handle (see illustration
above). Left-handers must follow these instructions
too.
– Wrap your fingers tightly around the handles,
keeping the handles cradled between your thumb
and forefinger.
– Position the chain saw in such a way that all parts of
your body are clear of the cutting attachment
whenever the motor is running. Stand to the left of
the cut while bucking, outside of the cutting plane
(see illustration above).
￭ Operating the chain saw with one hand is extremely
dangerous. One-handed operation makes it difficult to
oppose and absorb reactive forces (pushback, pull-in,
kickback) without losing control of the chain saw. It also
makes it difficult to prevent the bar and chain from skating
or bouncing along a limb or log. To reduce the risk of
serious or fatal injury to the operator or bystanders from
loss of control:
￭ To reduce the risk of serious or fatal cut injuries to the
operator or bystanders from loss of control, keep proper
footing and balance at all times:
– Do not work in wet grass or terrain.
– Take special care in overgrown terrain and always
watch for hidden obstacles such as tree stumps,
roots, rocks, holes and ditches to avoid stumbling.
– Be extremely cautious when working on slopes or
uneven ground.
– For better footing, always clear away fallen
branches, scrub and cuttings. Freshly debarked logs
and other material can increase the danger of
slipping, tripping or falling.
– Use extreme caution when cutting small-size brush,
branches and saplings because slender material
may catch the saw chain and spring toward you or
pull you off balance.
￭ To reduce the risk of injury from loss of control:
– Do not overreach. Keep proper footing and balance
at all times.
– Never attempt to switch on the chain saw when the
guide bar is in a cut or kerf. Doing so could lead to
reactive forces and injury.
￭ The bumper spike is designed to provide greater control
of the chain saw while cutting. If you work without the
bumper spike, the chain saw may pull you forward
suddenly. This could cause loss of control or, if the tip
strikes an object, kickback.
– Always work with the bumper spike to maintain
better control of the saw.
￭ Applying pressure to the chain saw when reaching the end
of a cut may cause the bar and rotating saw chain to
accelerate out of the kerf, go out of control and strike the
operator or some other object. To reduce the risk of injury:
– Use caution when approaching the end of a cut.
– Never put pressure on the chain saw when reaching
the end of a cut.
– STIHL recommends that first-time chain saw users
cut logs on a sawhorse.
– Avoid contacting any object with the
upper quadrant of the tip of the guide
bar. It may cause kickback to occur.
– Always hold the chain saw firmly with
both hands when you are working.
– Never use the chain saw with one hand.
– Never work on a ladder, roof, in a tree or
while standing on any other insecure
support.
– Never operate the chain saw above
shoulder height.
0000-GXX-1889-A0

Содержание

Похожие устройства

Скачать