![Icom IC-208H [69/96] I tone dtcs squelch operation](/img/pdf.png)
Icom IC-208H [69/96] I tone dtcs squelch operation
![Icom IC-208H [69/96] I tone dtcs squelch operation](/views2/1074422/page69/bg45.png)
54
10
POCKET BEEP AND TONE SQUELCH
10
■ Tone/DTCS squelch operation
The tone or DTCS squelch opens only when receiving a sig-
nal with the same pre-programmed subaudible tone or DTCS
code, respectively.
q Set the operating frequency.
w Program the CTCSS tone frequency or DTCS code in set
mode.
• See p. 52 for programming details.
e Push [TONE•T-SCAN] several times until “T SQL” or
“DTCS” appears in the function display.
r When a signal with the matched tone is received, the
squelch opens and the signal can be heard.
• When the received signal includes an unmatched tone, the
squelch does not open. However, the S/RF indicator shows the
received signal strength.
• To open the squelch manually, push [MONI•DTMF].
t Operate the transceiver in the normal way (push [PTT] to
transmit; release [PTT] to receive).
y To cancel the tone squelch, push [TONE•T-SCAN] several
times until “T SQL” or “DTCS” disappears.
z Set the operating frequency.
x Program the CTCSS tone frequency or DTCS
code in set mode.
• See p. 52 for programming details.
c
Push [FUNC] then [
SIMP
9(TSQL)] or [
HIGH
4(DTCS)]
to turn the tone squelch or DTCS squelch ON.
v When a signal with the matched tone is re-
ceived, the squelch opens and the signal can be
heard.
• When the received signal includes an unmatched
tone, the squelch does not open. However, the S/RF
indicator shows the received signal strength.
• To open the squelch manually, push [
MONI
1(BANK)].
b Operate the transceiver in the normal way (push
[PTT] to transmit; release [PTT] to receive).
n To cancel the tone squelch, push [FUNC] then
[
ENT
C(T-OFF)].
• “T SQL” or “DTCS” disappears.
TSQL
DTCS
Содержание
- Instruction manual 1
- Vhf uhf fm transceiver 1
- D features 2
- Detachable controller for flexible installation 55 w of high transmit output power 2
- Explicit definitions 2
- Foreword 2
- Important 2
- New dms dynamic memory scan system 2
- Read all instruction 2
- Remote control microphone standard 2
- Save this instruction manual 2
- Selectable backlit color from amber green and yellow 2
- Switchable vhf and uhf transceiver 2
- Be careful 3
- Caution 3
- Changes or modifications to this device not ex pressly approved by icom inc could void your authority to operate this device under fcc regulations 3
- For u s a only 3
- Precaution 3
- R warning neve 3
- R warning rf exposure 3
- 3 m 11 ft 1 4
- A ferrite core is adapted for the usa version 4
- Hm 118n 4
- Or hm 118tn tan 4
- Q dc power cable 3 m 1 w mobile mounting bracket 1 e microphone hm 133 1 r fuse 20 a 1 t mounting screws nuts and washers 1 set y microphone hanger 1 u separation cabl 4
- R t y u 4
- Supplied versions are also available 4
- Table of contents supplied accessories 4
- D installation methods 6
- I installation 6
- Quick reference guide 6
- Remote installation 6
- Single body installation 6
- D location 7
- D using the mounting bracket 7
- Quick reference guide 7
- D microphone connection 8
- D separation cable connection 8
- Quick reference guide 8
- D optional mb 58 installation 9
- Is avail able for separate installation 9
- Q drill 2 or 4 holes where the bracket is to be installed 9
- Quick reference guide 9
- R attach the supplied velcro pads large to the remote con troller and bracket t attach the supplied velcro pads small or rubber pad to the bracket as shown below then attach the remote con troller 9
- The optional mb 58 9
- W insert the supplied screws bolts and washers through the mounting base and tighten e adjust the angle for the clearest view of the function dis play and tighten 2 screws when the mounting base is used 9
- When using the optional mb 65 9
- Connecting to a dc power source 10
- Connecting to a dc power supply 10
- D battery connection 10
- D dc power supply connection 10
- Make sure the ground terminal of the dc power supply is grounded 10
- Quick reference guide 10
- R warning never remove the fuse holders from the dc power cable never connect the transceiver directly to a 24 v battery do not use the cigarette lighter socket for power con nections see p 5 for details attach a rubber grommet when passing the dc power cable through a metal plate to prevent a short circuit 10
- See p 76 for fuse replacement 10
- Use a 13 v dc power supply with at least 15 a capacity 10
- D antenna installation 11
- Quick reference guide 11
- I your first contact 12
- Quick reference guide 12
- Selecting the operating frequency band 12
- Turning on the transceiver 12
- Using the hm 133 12
- For the main band 13
- Quick reference guide 13
- The tuning dial will allow you to dial in the frequency you want to operate pages 12 and 13 will instruct you on how to set the tuning speed 13
- Tune the frequency 13
- Using the hm 133 13
- You can directly enter the frequency with the hm 133 keypad 13
- I repeater operation 14
- Quick reference guide 14
- Repeater tone 14
- Setting duplex 14
- Using the hm 133 14
- I programming memory channels 15
- Quick reference guide 15
- Selecting a memory channel 15
- Setting a frequency 15
- Using the hm 133 15
- Writing a memory channel 15
- I front panel controller 16
- Panel description 16
- Panel description 17
- I function display 18
- Panel description 18
- Panel description 19
- I rear panel 20
- Panel description 20
- D data jack pin assignment 21
- Panel description 21
- I microphone hm 133 22
- Panel description 22
- I microphone keypad 23
- Panel description 23
- Key function secondary function key other functions 24
- Panel description 24
- I optional microphones hm 118n tn tan 25
- Panel description 25
- D operating frequency band selection 26
- D turning power on off 26
- D vfo and memory modes 26
- I preparation 26
- Setting a frequency 26
- I using the keypad 27
- I using the tuning dial 27
- I using the y z keys 27
- Setting a frequency 27
- I tuning step selection 28
- Setting a frequency 28
- D frequency lock 29
- D microphone keypad lock 29
- I lock functions 29
- Setting a frequency 29
- Basic operation 30
- I monitor function 30
- I receiving 30
- Basic operation 31
- I squelch attenuator 31
- Basic operation 32
- I selecting output power 32
- I transmitting 32
- Basic operation 33
- I audio mute function 33
- I one touch ptt function 33
- I general 34
- Normally a repeater has independent frequencies for each receiver and transmitter a subaudible tone may also be required to access a repeater 34
- Reference amateur radio hand books and local ham maga zines for details of local repeaters such as repeater input out put frequencies and locations 34
- Repeater operation 34
- Repeater operation flow chart 34
- Repeaters allow you to extend the operational range of your radio because a repeater has much higher output power than the typical transceiver 34
- I accessing a repeater 35
- Repeater operation 35
- Repeater operation 36
- D subaudible tones 37
- Encoder function 37
- I subaudible tones 37
- Repeater operation 37
- D 1750 hz tone 38
- D dtmf tones 38
- Repeater operation 38
- I offset frequency 39
- Repeater operation 39
- D frequency range and offset direction 40
- D setting the auto repeater function on off 40
- I auto repeater 40
- Repeater operation 40
- U s a version only 40
- I general description 41
- I memory channel selection 41
- Memory operation 41
- I programming a memory channel 42
- D programming a memory channel via the microphone 43
- Memory operation 43
- Copying memory contents 44
- D memory call vfo 44
- Memory operation 44
- D memory call memory call 45
- Memory operation 45
- I programming channel names 46
- Memory operation 46
- Memory operation 47
- D to indicate the channel name 48
- Memory operation 48
- I memory clearing 49
- Memory operation 49
- I memory bank selection 50
- Memory operation 50
- I memory bank setting 51
- Memory operation 51
- I transferring bank contents 52
- Memory operation 52
- Call channel operation 53
- I call channel selection 53
- I call channel transferring 53
- I programming a call channel 54
- I scan types 55
- Scan operation 55
- D operation 56
- D preparation 56
- I scan start stop 56
- Scan operation 56
- I scan edges programming 57
- D programming scan edges via microphone 58
- Scan operation 58
- I skip channel setting 59
- Scan operation 59
- I scan resume condition 60
- Scan operation 60
- I priority watch types 61
- Priority watch 61
- I priority watch operation 62
- Priority watch 62
- Dtmf memory encoder 63
- I programming a dtmf code 63
- Dtmf memory encoder 64
- Programming a dtmf code via microphone 64
- D automatic transmission dtmf memory 65
- D transmitting a dtmf memory directly 65
- Dtmf memory encoder 65
- I transmitting a dtmf code 65
- D manual transmission 66
- Dtmf memory encoder 66
- I dtmf speed 66
- I pocket beep operation 67
- Pocket beep and tone squelch 67
- D available tone frequency list 68
- D calling a waiting station using pocket beep 68
- Pocket beep and tone squelch 68
- I tone dtcs squelch operation 69
- Pocket beep and tone squelch 69
- I tone scan 70
- Pocket beep and tone squelch 70
- I set mode 71
- Other functions 71
- Adjust to suit lighting conditions the levels 1 dark to 8 bright default are available 72
- Available subaudible tone frequencies 72
- D display color 72
- D display dimmer 72
- D mic lock function 72
- D repeater tone 72
- D tone squelch tone 72
- Other functions 72
- Sets subaudible tone frequency both encoder and decoder for tone squelch operation total of 50 tone frequencies 67 254 hz are available default 88 hz 72
- Sets subaudible tone frequency encoder only for repeater operation total of 50 tone frequencies 67 254 hz are available default 88 hz 72
- Sets the supplied hm 133 s optional for some versions key lock function from on and off default 72
- The display color can be set to amber default yellow or green 72
- Yellow setting green setting 72
- D dtcs code 73
- D dtcs polarity 73
- D offset frequency 73
- D tuning step 73
- Other functions 73
- D channel skip setting 74
- D memory bank setting 74
- D memory name setting 74
- D scan resume timer 74
- Other functions 74
- D memory bank link function 75
- D program scan skip setting 75
- D weather alert function 75
- Other functions 75
- D entering initial set mode 76
- I initial set mode 76
- Initial set mode items 76
- Other functions 76
- The initial set mode is accessed at power on and al lows you to set seldom changed settings in this way you can customize transceiver operations to suit your preference and operating style 76
- D auto power off 77
- D auto repeater 77
- D key touch beep 77
- D time out timer 77
- Other functions 77
- D cooling fan control 78
- D data transmission speed 78
- D microphone sensitivity 78
- D squelch attenuator 78
- D squelch delay 78
- Other functions 78
- D active band 79
- D dtmf speed 79
- D narrow tx function 79
- Other functions 79
- I am fm narrow mode 80
- Other functions 80
- D weather alert function 81
- D weather channel selection 81
- I weather channel operation 81
- Other functions 81
- Usa version only 81
- D f 1 f 2 keys on hm 133 82
- D up dn keys on a microphones 82
- I microphone keys 82
- Other functions 82
- Other than hm 133 82
- I all reset 83
- I partial reset 83
- Other functions 83
- D cloning between transceivers 84
- I data cloning 84
- Other functions 84
- D cloning error 85
- D cloning using a personal computer 85
- Other functions 85
- D 1200 bps packet operation 86
- D data speed 86
- I packet operation 86
- Other functions 86
- Other functions 87
- D 9600 bps high speed packet operation 88
- Other functions 88
- D adjusting the transmit signal output from the tnc 89
- Other functions 89
- I troubleshooting 90
- If your transceiver seems to be malfunctioning please check the following points before sending it to a service center 90
- Maintenance 90
- Problem possible cause solution ref 90
- I fuse replacement 91
- Maintenance 91
- D general 92
- D receiver 92
- D transmitter 92
- I specifications 92
- Specifications and options 92
- I options 93
- Specifications and options 93
- Dtmf memory clone mode 94
- Initial set mode 94
- Mode arrangement 94
- Set mode 94
- Mode arrangement 95
- 1 32 kamiminami hirano ku osaka 547 0003 japan 96
Похожие устройства
- Jabra Drive Инструкция по эксплуатации
- Icom IC-2720H Инструкция по эксплуатации
- Canon 650D Body Инструкция по эксплуатации
- Icom IC-2800H Инструкция по эксплуатации
- Sony NEX-F3K+SEL1855 Silver Инструкция по эксплуатации
- Icom IC-910H Инструкция по эксплуатации
- Sony NEX-F3D+SEL1855+SEL16F28 Black Инструкция по эксплуатации
- Ardo FLN 106 EW Инструкция по эксплуатации
- Icom IC-P7A Инструкция по эксплуатации
- Sony NEX-F3Y+SEL1855+SEL55210 Black Инструкция по эксплуатации
- Icom IC-Q7A Инструкция по эксплуатации
- Panasonic DMC-GF5KEE-K Инструкция по эксплуатации
- Icom IC-T2H Инструкция по эксплуатации
- Panasonic DMC-GF5KEE-R Red Инструкция по эксплуатации
- Icom IC-T7H Инструкция по эксплуатации
- Panasonic DMC-GF5XEE-K Black Инструкция по эксплуатации
- Icom IC-T90A Инструкция по эксплуатации
- Panasonic DMC-GF5XEE-R Red Инструкция по эксплуатации
- Icom IC-T22A Инструкция по эксплуатации
- Panasonic DMC-GF5XEE-W White Инструкция по эксплуатации