Icom IC-F40GT [13/32] Charging note
![Icom IC-F40GT [13/32] Charging note](/views2/1074497/page13/bgd.png)
9
3
BATTERY PACKS
‘‘
Charging NOTE
Prior to using the transceiver for the first time, the battery pack must
be fully charged for optimum life and operation.
• Recommended temperature range for charging:
+10°C to +40°C (50°F to 140°F).
• Use the supplied charger or optional charger
(BC-119/BC-121 for
rapid charging, BC-137 #02 for regular charging) only. NEVER use
other manufacturers’ chargers.
The optional BP-209 or BP-210 battery packs include rechargeable
Ni-Cd (Ni-MH: BP-210) batteries and can be charged approx. 300
times. Charge the battery pack before first operating the transceiver
or when the battery pack becomes exhausted.
If you want to charge the battery pack more than 300 times, the fol-
lowing points should be observed:
• Avoid over charging. The charging period should be less than
48 hours.
• Use the battery until it becomes almost completely exhausted
under normal conditions. We recommend battery charging after
transmitting becomes impossible.
DD
Battery pack life
When the operating period becomes extremely short, even after
charging the battery pack fully, a new battery pack is needed.
Содержание
- If30gt gs 1
- If40gt gs 1
- Instruction manual 1
- Uhf transceiver 1
- Vhf transceiver 1
- Foreword 2
- Important 2
- Installation notes 2
- Table of contents 4
- Accessories 5
- Accessory attachment 5
- F0 red 6
- F1 black 6
- F2 black 6
- F3 black 6
- Panel description 6
- Switches controls keys and connectors 6
- Function display 8
- Battery pack replacement 9
- Battery packs 9
- Before replacing the battery pack the volume control must be ro tated fully counterclockwise until a click is heard to turn the power off 9
- D battery packs 9
- Slide the battery release forward then pull the battery pack up ward with the transceiver facing you 9
- Battery cautions 10
- Battery charging 11
- Charging note 13
- Battery case option 14
- General 15
- Programmable functions 15
- Conventional operation 20
- Receiving and transmitting 20
- Call procedure 21
- Manual 5 tone codes 22
- Transmitting notes 22
- Tx code channel selection 22
- Basic operation 23
- Operation 23
- Smartrunk i 23
- D calling another local system subscriber 25
- D placing a telephone call 25
- Enter the phone number followed by 1 m 25
- Enter the subscriber number followed by 3 m 25
- For additional operating instructions contact your dealer or system operator 25
- Dtmf pager code squelch 26
- Other functions 26
- Installation 27
- Optional unit installation 27
- Cloning 28
- Options 29
Похожие устройства
- Ardo 66 GG40 VX Инструкция по эксплуатации
- Samsung ST77 Red Инструкция по эксплуатации
- Icom IC-F30LT Инструкция по эксплуатации
- Ardo 66 GG40 X Инструкция по эксплуатации
- Samsung ST77 Silver Инструкция по эксплуатации
- Icom IC-F40LT Инструкция по эксплуатации
- Ardo 66 GG40 W Инструкция по эксплуатации
- Sony SAL 1855 Инструкция по эксплуатации
- Icom IC-F33GT Инструкция по эксплуатации
- Ardo C 6640 G6 Инструкция по эксплуатации
- Sony SAL30 M28 Инструкция по эксплуатации
- Icom IC-F43GT Инструкция по эксплуатации
- Ardo A 56V4 ED Инструкция по эксплуатации
- Sony SAL35 F18 Инструкция по эксплуатации
- Icom IC-F121 Инструкция по эксплуатации
- Ardo A 504EB Инструкция по эксплуатации
- Icom IC-F221 Инструкция по эксплуатации
- Ardo KA 604 EB Инструкция по эксплуатации
- Icom IC-F121S Инструкция по эксплуатации
- Ardo TLE 6640 G6 X Инструкция по эксплуатации