Icom IC-F40GT Инструкция по эксплуатации онлайн [18/32] 69015

PROGRAMMABLE FUNCTIONS

DTMF TRANSMISSION

This function allows you to send a pre-programmed DTMF code to

control a repeater, open another transceiver’s squelch, etc.

Manual transmission:

Push the desired digit keys in sequence while pushing [PTT].

• Pushing [PTT] may not be necessary depending on programming.

Automatic pre-programmed transmission:

q Push the [DTMF Autodial] switch to select DTMF autodial mode,

then push [CH Up] or [CH Down] to select the desired channel.

w Push the [DTMF Autodial] switch to send a DTMF code.

DTMF RE-DIAL FUNCTION

This function allows you to transmit the last-used DTMF code at the

push of a key.

Push the [Re-dial] switch momentarily to activate the function.

• The previously transmitted DTMF code is automatically transmitted.

• If no code has been transmitted since turning the power ON, this func-

tion does not activate.

EMERGENCY FUNCTION

The emergency function allows you to send an emergency signal

quickly and easily to your Base Station, etc. in case of emergency.

Push and hold the [Emergency Single/Repeat] switch for 1 sec. to

activate the emergency function.

• The transceiver selects a pre-programmed channel, then sends an

emergency signal to your Base Station.

• The pre-programmed channel remains selected until a control signal is

received from the Base Station, or power is turned OFF.

• The emergency call is repeatedly transmitted at pre-programmed in-

tervals.