Vitek VT-3476 [15/32] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-3476 [15/32] English

Vitek VT-3476 [15/32] English
4 Press the PLAY/PAUSE button (14).
5 Move the FUNCTION switch to CD.
6 Wait one hour.
The sound skips
1 The disc is severely damaged.
2 The device is being moved.
1 Change discs.
2 Stabilize the device.
TAPE RECORDER
Tape does not go in
Tape holder does not shut
The tape is upside down.
Put the tape right side up.
The tape will not play
1. The tape is defective.
2. The PAUSE button (4) is pressed.
3. The batteries are low.
4. The tape has grown slack.
1. Switch tapes.
2. Press the PAUSE button (4) again.
3. Replace them.
4. Use a pencil to take up the slack.
Cannot record
The tabs are removed on the tape.
Switch tapes.
Sound is distorted
Erasure is incomplete
• The heads are dirty.
• You are using a high position, or metal tape.
• Clean them.
• Use a normal tape.
RAIDIO
Too much static
• Receive electrical interference.
• Receiving interference from motors, fluorescent
lights or television.
• Plug in the power cord securely.
• Move the device to a different place.
• Turn off the TV.
• Adjust the antenna.
SPECIFICATION
CD Player
Sampling Frequency Pick-up
44.1 kHz Non-contact optical pick-up (Semi-
conductor laser)
Radio
Reception Frequency
FM: 88-108 MHz AM: 530-1600 kHz
MP3
File System Compatibility Sampling Frequency
Bit rates
ISO 9660 (level 1), Joliet 32 kHz, 44.1 kHz 32-
320 kbps
Tape Recorder
Track Motor Heads: 4-track 2-channel stereo
Electronic governor DC motor Magnetic head
for erasure, AC bias for recording
Fast-wind Time: Approx. sec. (C-60 cassette)
Microphone
Omnidirectional microphone
GENERAL
Speakers cm x 2 (4Q)
cm x 2 (8Q)
Max Output 2W + 2W(JEITA/DC)
Output Terminals: Phone jack (Stereo mini jack)
mW (Ohm)
Power Supply: AC 230 V~50Hz
DC 12 V(D-sizex8)
Power Consumption: 15 W
Dimension: 432 (W) x 157 (H) x 231 (D) mm
Technical characteristics may be changed by
the manufacturer without prior notice.
SERVICE LIFE – NO LESS THAN 5 YEARS
GUARANTEE
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms of
this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 89/336/EEC and to the Low
Voltage Regulation (23/73 EEC)
ENGLISH
15
3476.qxd 01.04.2005 22:13 Page 15

Содержание

Похожие устройства

3476 qxd 01 04 2005 22 13 Page 15 ENGLISH 4 Press the PLAY PAUSE button 14 5 Move the FUNCTION switch to CD 6 Wait one hour MP3 File System Compatibility Sampling Frequency Bit rates ISO 9660 level 1 Joliet 32 kHz 44 1 kHz 32320 kbps Tape Recorder Track Motor Heads 4 track 2 channel stereo Electronic governor DC motor Magnetic head for erasure AC bias for recording Fast wind Time Approx sec C 60 cassette Microphone Omnidirectional microphone The sound skips 1 The disc is severely damaged 2 The device is being moved 1 Change discs 2 Stabilize the device TAPE RECORDER Tape does not go in Tape holder does not shut The tape is upside down Put the tape right side up GENERAL Speakers cm x 2 4Q cm x 2 8Q Max Output 2W 2W JEITA DC Output Terminals Phone jack Stereo mini jack mW Ohm Power Supply AC 230 V 50Hz DC 12 V D sizex8 Power Con su m ption 15 W Dimension 432 W x 157 H x 231 D mm The tape will not play 1 The tape is defective 2 The PAUSE button 4 is pressed 3 The batteries are low 4 The tape has grown slack 1 Switch tapes 2 Press the PAUSE button 4 again 3 Replace them 4 Use a pencil to take up the slack Technical characteristics may be changed by the manufacturer without prior notice SERVICE LIFE NO LESS THAN 5 YEARS Cannot record The tabs are removed on the tape Switch tapes GUARANTEE Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased The bill of sale or receipt must be produced when making any claim under the terms of this guarantee Sound is distorted Erasure is incomplete The heads are dirty You are using a high position or metal tape Clean them Use a normal tape This product conforms to the EMCf g Requirements as laid down by the Council x Directive 89 336 EEC and to the Low Voltage Regulation 23 73 EEC RAI DIO Too much static Receive electrical interference Receiving interference from motors fluorescent lights or television Plug in the power cord securely Move the device to a different place Turn off the TV Adjust the antenna SPECIFICATION CD Player Sampling Frequency Pick up 44 1 kHz Non contact optical pick up Semi conductor laser Radio Reception Frequency FM 88 108 MHz AM 530 1600 kHz 15

Скачать