Philips FC8204 [8/104] Micro filter specific types only

- To clean carpet, push the rocker switch on the other side to make the brush strips disappear

into the housing (Fig. 7).



Your vacuum cleaner comes with one or more of these three accessories.

1 Connect the small nozzle, crevice nozzle or brush nozzle directly to the handgrip or to the

tube (Fig. 8).

1 Use the small nozzle to vacuum clean small areas, e.g. the seats of chairs and sofas.

2 Use the crevice nozzle to clean narrow corners or hard-to-reach places.

3 Use the small brush nozzle to clean computers, bookshelves etc.





- You can carry the vacuum cleaner by the handle at the front or on top of the appliance (Fig. 9).

1 Pull the cord out of the appliance and insert the mains plug into the wall socket.

2 Press the on/off button on top of the appliance with your foot to switch on the appliance.

- If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to park

the tube in a convenient position (Fig. 10).



You can adjust the suction power with:

- the suction power slide on the handgrip (Fig. 11)

- the electronic suction power control on the vacuum cleaner (specic types only) (Fig. 12)





Always unplug the appliance before you replace the dustbag.

Replace the dustbag as soon as the dustbag-full indicator on top of te appliance has changed colour

permanently.

1 Open the cover (Fig. 13).

2 Push the cardboard tag of the dustbag backwards (Fig. 14).

3 Pull the cardboard tag upwards to lift the dustbag out of the appliance (Fig. 15).

, The dustbag is sealed automatically.

4 Place the bottom edge of the new dustbag in front of the ridge on the bottom of the

appliance (1). Pull the cardboard front of the dustbag towards you (‘click’) (2) (Fig. 16).

5 Close the cover.



Always unplug the appliance before you replace a lter.

Your vacuum cleaner is equipped with either a micro lter or a HEPA lter.



Replace the micro lter every 6 months.

1 To remove the lter grille, turn it anticlockwise (1) and pull it out (2) (Fig. 17).

2 Remove the lter holder from the grille.

8