Vitek VT-3468 [6/28] English

ENGLISH

CONTROLS AND FUNCTIONS

CONNECTING THE APPLIANCE TO A TELEVISION SET:

1. To connect the appliance to a television set through a SCART type cable, you must use an RCA-to-

SCART adapter, which can be purchased wherever audio-video equipment is sold.

2. To play NTSC disks, you must connect the appliance to a multi-system or NTSC television set.

3. Before connecting this appliance to a television set, make sure that it is turned off, and the power

cord is disconnected from the AC power outlet.

4. Do not close the ventilation openings on either of the appliances and place them in a way that

allows air to circulate freely.

5. Before connecting the appliance to another appliance, read the instructions for the other appliance

completely.

6. When connecting audio/video cables, observe color coding.

7. During playback, the volume of the television set may be less than when receiving broadcasts pro-

gramming. If this happens, set the volume to a desired level.

8. For correct connection of the unit to a TV-set by audio/video RCA-cable follow the diagram below

NOTE: If the appliance is not connected correctly to a television set, the audio or video might not

function properly. If this happens, disconnect the power source, check all connections, and turn the

appliance on once again.

LIQUID CRYSTAL DISPLAY (31)

1. Shows when CDs and VCDs are being

played.

2. Shows when the REPEAT all tracks func-

tion is turned on.

3. Shows the sequence number of the track

being played or the total number tracks on

the disk.

4. Shows when the REPEAT function is

turned on.

5. Shows when the REPEAT A-B function is

turned on.

6. Shows the minutes portion of the time

count of the track being played.

7. Shows when the REPEAT one track function is turned on.