Philips GC9020 [9/146] Auto calc clean function

6 To iron with steam, set the temperature dial to 2 or higher.

7 Put the plug in an earthed wall socket.

Set the on/off knob to ‘on’.

The steam light ashes to indicate that the steam generator is heating

up. After 2 minutes the appliance is ready for use. You hear two beeps,

the steam light stops ashing and stays on. Press the steam trigger for

steam.

Type GC9040 only: To remove stubborn creases, you can use the steam

boost function. Set the temperature dial between

3 and MAX.

Press the steam boost button.

Never direct the steam at people.

8 Press the steam button to select the desired steam setting.

; for moderate steam output and # for high steam output (set a

temperature from 3 to MAX)

l for low steam output (set a temperature from 2 to MAX).

Note: If you do not use the iron for more than 10 minutes, the appliance

switches off automatically for safety reasons. The automatic shut-off light

ashes. To switch on the appliance again, press any button.



This appliance is equipped with an Auto Calc Clean function. Over

time, scale particles build up inside the steam generator. The appliance

automatically performs a Calc Clean process to clean itself from scale after

using 6 to 8 tanks of water.

OFF

EnGlish 9