Philips FC9083 [15/238] English

1 Remove the dustbag holder with the dustbag.

2 Press the tab at the top of the motor protection lter holder down

to release it.

3 Pull the top of the motor protection lter holder towards you (1)

and lift the lter holder out of the dustbag compartment (2).

4 Shake the lter over a dustbin to clean it.

5 Put the clean lter back into the lter holder.

6 Fit the two lugs of the lter holder behind the ridge at the bottom

to ensure that it ts properly at the top (1). Then press the lter

holder home (‘click’) (2).

7 Place the dustbag holder with the dustbag back into the appliance

and close the cover.



HEPA 13 washable lter is able to remove 99.95% of all particles down to

0.0003mm in size from the outlet air. This not only includes normal house

dust, but also harmful microscopic vermin such as dust mites and their

excrements, which are well-known causes of respiratory allergies.

Note: To guarantee optimal dust retention and performance of the vacuum

cleaner, always replace the HEPA lter with an original Philips lter of the

correct type (see chapter ‘Ordering accessories’).

Clean the washable HEPA 13 lter every 6 months. You can clean the

washable HEPA 13 lter max. 4 times. Replace the lter after it has been

cleaned 4 times.

 15