Candy LB CTD 105 [8/14] Programme selection

PROGRAMME SELECTION

Select as follows:

• Check the programme table and set the desired programme using selector

(A)

• Select the options as permitted: the options available via the keys depend on

which programme is selected. If a key flashes when pressed, the options it offers are

not available. If it remains lit, they are. Options can be seen on the display (V).

• Press the Start/ Pause button. The door lock lamp will light up and the display will

show three dashes (- - -) and then the average duration of the programme selected.

After 10-15 minutes, during which time the water temperature, amount of washing,

etc. are determined, the display will show the time remaining to the end of the wash

cycle.

• Because the machine is electronic, the programme may take up to one minute to

commence. Its fuzzy logic programming technology gives this machine smart

monitoring capabilities, enabling it to adapt water levels, washing rates and spin

speeds with no further intervention by the user.

NOTE: A special memory unit stores the programme choice in case of power failure, so that

the machine will resume washing at the point where it left off when power is restored.

END OF CYCLE: At the end of the cycle the lights go out and the display reads (0 0 0). After

2 minutes, the display begins to flash. This means that the washing can be removed.

Press Start/ Pause and set the control to OFF.