Candy CDP 1D64W/K [6/32] Appliances please refer to the specific chapter or to the instruc tions enclosed with the booklet
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Candy CDP 1D64W/K [6/32] Appliances please refer to the specific chapter or to the instruc tions enclosed with the booklet

Candy CDP 1D64W/K [6/32] Appliances please refer to the specific chapter or to the instruc tions enclosed with the booklet
6
3
598
556/573
1
INSTALLATION IN FITTED
KITCHENS
Fitting between existing cabinets
■ The height of the dishwasher, 85 cm, has
been designed in order to allow the
machine to be fitted between existing
cabinets of the same height in modern
fitted kitchens. The feet can be adjusted
so that correct height is reached.
■ The laminated top of the machine does
not require any particular care since it is
heatproof, scratchproof and stainproof
(fig. 1).
Underneath existing work top
(when fitting beneath a work top)
■ In most modern fitted kitchens there is
only one single work top under which
cabinets and electrical appliances are
fitted. In this case remove the work top
of the dishwasher by unscrewing the
screws under the rear edge of the top
(fig. 2a).
IMPORTANT
After removing the work top, the
screws MUST BE screwed again
under the rear edge of the top
(fig. 2b).
■ The height will then be reduced to 82 cm,
as scheduled by the International
Regulations (ISO) and the dishwasher
will fit perfectly under the kitchen
working top (fig. 3).
2
a
b
a
b
■ If it you need to move the machi-
ne after removing the packaging,
do not try to lift it by the bottom of
the door.
Open the door slightly and lift the
machine by holding on the top.
■ For the installation of built-in
appliances, please refer to the
specific chapter or to the instruc-
tions enclosed with the booklet.
By placing the mark on this
product, we are confirming
compliance to all relevant
European safety, health and
environmental requirements
which are applicable in legislation
for this product.

Содержание

Похожие устройства

Скачать