Candy CSF 4570 EX [6/15] If your model have not water softener you may skip this section

Always use salt intended for use with dishwashers.

The salt container is located beneath the lower rack and should be filled as follows:

Remove the lower basket and then unscrew and remove the cap from the salt

container.

ou are fillin

the container for the first time ,fill 2/3 of its volume with water.

Place the end of the funnel(supplied) into the hole and introduce about 2kg of

salt .It is normal for a small amount of water to come out of the salt container

Unscrew the cap from the salt container.

There is a ring on the container with an arrow on it (see Figure to the side), if

necessary, rotate the ring in the anticlockwise direction from the "-" Setting

toward the "+" sign, based on the hardness of the water being used.It is

recommended that adjustments should be made in accordance with the following

schema:

The salt container must be refilled when the salt warnin

ht comes on. Thou

h the salt container is filled

enough, the indicator light may not black out before the salt fully dissolve.

If there are spills of the salt, a soak program could be run to wipe them out.

Contact your local water board for information on the hardness of your water supply.

The hardness of the water varies from

lace to

lace. If hard water is used in the dishwasher, de

osits will form on the dishes

and utensils.

The a

liances is e

ed with a s

ecial softener that uses a salt s

ecificall

desi

ned to eliminate lime and minerals from the

water.

There are two ways to reduce the hardness: one way is using water softener, the other is using

detergent.

water

If your model have not water softener, you may skip this section.