Stihl KGA 770 Инструкция по эксплуатации онлайн [54/472] 71035

Stihl KGA 770 Инструкция по эксплуатации онлайн [54/472] 71035
KGA 770
English
52
Power tool cuts out during operation
Battery or power tool circuitry too hot Take the battery out of the power tool;
allow the battery and power tool to cool
down
Electric or electromagnetic interference Remove the battery and refit it again
Thermal overload cutout has tripped –
sweeping pressure set too high
Set sweeping pressure to suit surface
being cleaned
Wait about 30 seconds for overload cut-
out to cool down.
Thermal overload cutout has tripped –
side broom or roller brush blocked
Remove blockage.
Wait about 30 seconds for overload cut-
out to cool down. If roller brush is
blocked, press switch to reset overload
cutout.
Running time is too short
Battery is not fully charged Charge the battery
Useful life of battery has been reached
or exceeded
Check battery
1)
and replace
Height setting is too low – side broom
contact pressure is too high.
Adjust height to suit the surface being
cleaned.
Always remove the battery before carrying out any work on the power tool.
Condition Cause Remedy

Содержание

Скачать