Entel HT786T [8/18] Preparing your radio for use

Common

Preparing Your Radio For Use cont...

Attaching / Removing the Aerial

1 To attach, carefully align the aerial with the

socket. Screw in the aerial clockwise (taking

care not to cross the thread) until it is seated

firmly against the top of the radio.

2 To remove, unscrew the aerial

anti-clockwise.

Attaching / Removing Audio Accessories

1 To attach, remove the accessory cover by unscrewing the

locking screw anti-clockwise (leave cover attached or store in a

safe place). Attach accessory plug by locating over the socket.

Carefully tighten the locking screw clockwise until finger tight

(do not tighten with a screwdriver etc).

2 To remove, unscrew the locking screw by hand in an anti-

clockwise direction (carefully use a coin or screwdriver if too

tight). Ensure you re-fit the accessory cover so as to protect

the socket.

Charging Your Radio

Several charger options are available. Please refer to your

charger user guide.

Turning your radio on

Turn your radio on by pressing the on / off button on the front of the radio. The radio will bleep and

the LED will illuminate constant yellow for approximately 4 seconds, followed by a second “warble” (if

not disabled by the Dealer when programmed).