Makita DLM382Z [12/100] Attaching the mulching plug

Makita DLM382Z [12/100] Attaching the mulching plug
12 ENGLISH
Installing the handle
NOTICE: When installing handles, position the
cords so that they are not caught by anything
between the handles. If the cord is damaged, the
mower switch may not work.
1. Slide the both ends of lower handle into the
groovesofthemowerthenfullytightentheclamping
screws.
►Fig.4: 1. Clamping screw 2. Lower handle
2. Align the screw holes of upper handle and lower
handle. Secure them with the clamping screws and
nuts.
►Fig.5: 1. Clamping nut 2. Clamping screw
NOTE:Holdtheupperhandlermlysothatitdoes
notdropo󰀨yourhand.
3. Attach the holders to the handle. Position the
powersupplycordasshowninthegure.
►Fig.6: 1. Holder
Removing the mulching plug
Optional accessory
1. Open the rear cover.
►Fig.7: 1. Rear cover
2. Holdthemulchingplugbythehandle,andthen
pullitoutfromthemowerbodyasshowninthegure.
►Fig.8: 1. Mulching plug 2. Handle
Installing the grass basket
1. Open the rear cover.
►Fig.9: 1. Rear cover
2. Hook the grass basket on the rod of the mower
bodyasshowninthegure.
►Fig.10: 1. Hook 2. Rod 3. Grass basket
Attaching the mulching plug
Optional accessory
1. Open the rear cover, and then remove the grass
basket.
►Fig.11: 1. Rear cover 2. Grass basket
2. Holdthemulchingplugbythehandle,andthen
attachittothemowerbodyasshowninthegure.
►Fig.12: 1. Mulching plug 2. Handle
FUNCTIONAL DESCRIPTION
Installing or removing battery cartridge
CAUTION: Always switch o󰀨 the machine
before installing or removing of the battery
cartridge.
CAUTION: Make sure that you lock the battery
cover before use. Otherwise,mud,dirt,orwatermay
causedamagetotheproductorthebatterycartridge.
CAUTION: Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
itmayaccidentallyfalloutofthemachine,causing
injurytoyouorsomeonearoundyou.
CAUTION: Do not install the battery cartridge
forcibly.Ifthecartridgedoesnotslideineasily,itis
notbeinginsertedcorrectly.
NOTE:Themachinedoesnotworkwithonlyone
batterycartridge.
To install the battery cartridge;
1. Slidethebatterycoverlockingleverandopenthe
batterycover.
►Fig.13: 1.Batterycover2.Batterycoverlocking
lever
2. Alignthetongueonthebatterycartridgewiththe
slot on the mower then slide the cartridge until it locks in
place with a little click.
►Fig.14: 1.Batterycartridge
3. Insertthelockkeyintheplaceshowninthegure
as far as it will go.
►Fig.15: 1.Lockkey
4. Closethebatterycoverandpushituntilitis
latched with the locking lever.
To remove the battery cartridge from the mower;
1. Slidethebatterycoverlockingleverandopenthe
batterycover.
2. Pulloutthebatterycartridgefromthemowerwhile
sliding the button on the front of the cartridge.
3. Pulloutthelockkey.
4. Closethebatterycover.
Machine / battery protection system
Themachineisequippedwithamachine/battery
protectionsystem.Thissystemautomaticallycutso󰀨
powertothemotortoextendtoolandbatterylife.The
machinewillautomaticallystopduringoperationifthe
machineorbatteryisplacedunderoneofthefollowing
conditions.
Overload protection
When the machine is operated in a manner that causes
ittodrawanabnormallyhighcurrent,themachine
automaticallystopswithoutanyindication.Inthissitu-
ation,turnthemachineo󰀨andstoptheapplicationthat
caused the machine to become overloaded. Then turn
the machine on to restart.

Содержание

Скачать