Candy CFT610/5S [9/11] Carbon filter

GREASE MESH FILTERS

The filters can be cleaned by hand. Soak them for about 3 minute in water with a

grease-loosening detergent then brush it gently with a soft brush. Please do not apply

too much pressure, avoid to damage it . (Leave to dry naturally out of direct sun light)

Filters should be washed separately to crockery and kitchen utensils. it is advisable

not to use rinse aid.

● Removing the filters as the instruction in Pic.below.

● Please do not use abrasive detergent for it will damage the hood.

INSTALLING GREASE MESH FILTERS

• To install filters for the following four steps .

- Angle the filter into slots at the back of the hood.

- Push the button on handle of the filter.

- Release the handle once the filter fits into a resting position.

- Repeat to install all filters.

CARBON FILTER

Activated carbon filter can be used to trap odors. Normally the activated carbon filter

should be changed at three or six months according to your cooking habit. The

installation procedure of activated carbon filter is as below.

1. Remove the grease filter.

2. Place the carbon filter onto the grease filter.

3. Fix the properly-adjusted carbon filter with the small steel wire.

4. Reinstall the grease filter.

5. Use carbon filters for recirculation mode only.