Candy CCVB 30 [28/31] Pivot hinge

.26.

o Install the door to the left hinge side by tightening the Support Rod with

the 2 screws.

Pivot Hinge

Screws

IMPORTANT: Check that the door opens and shuts correctly, without fouling,

after you have completed the door reversal process.

After the door has been reversed, you should check the door seal of the

Wine Coolers. The seal should not be creased or crushed; otherwise there

will be a gap between it and the inside of the door.

o The seal must adhere properly all the way around the door.

o If the seal is not adhering to the cabinet properly, then you should either:-

a) Use a warm damp cloth and manipulate the seal until it does adhere to

the cabinet properly, all the way around the door.

b) Use a hair dryer on its lowest heat setting and lightly heat the areas of

the door seal that are not adhering correctly. The heat will make the

seal more pliable and this will allow you to manipulate the seal into the

correct position.

IMPORTANT: DO NOT HEAT THE DOOR SEAL ON ANYTHING BUT THE LOWEST

HEAT SETTING, OR HEAT THE SEAL FOR A LONG PERIOD OF TIME. OTHERWISE

DAMAGE MAY BE CAUSED TO THE DOOR SEAL, WHICH WOULD NOT BE

RECTIFIED UNDER THE GUARANTEE FREE OF CHARGE.

IMPORTANT: WHEN YOU HAVE REVERSED THE DOOR OF THE APPLIANCE, IF

YOU HAVE PLACED THE APPLIANCE ON ITS BACK, YOU MUST WAIT FOR 8

HOURS BEFORE SWITCHING THE APPLIANCE BACK ON.