Candy CCVB 30 [8/31] Using your wine cooler

.06.

The Wine Cooler shelves

o To prevent damaging the door gasket, make sure the door is fully open

when pulling shelves out of the rail compartment.

o For easy access to the bottles stored, pull the shelves out approximately

1/3 of the way.

o For a model without telescopic rails, 2 plastic Stoppers of each shelf is on

left and right side of the interior cabinet to prevent the shelf from falling

out.

A. Stopper

USING YOUR WINE COOLER

Before Switching On

o Make sure that it has been installed by a suitably qualied person, as per

the information contained in the installation instructions.

o After delivery, wait for eight hours before connecting the appliance to

your mains supply. This will allow any refrigerant gasses that may have

been disturbed during the transportation process to settle.

o The outside of the appliance and the removable accessories contained

within it, should be cleaned with a solution of liquid detergent and water.

o The interior of the appliance should be cleaned with a

solution of sodium bicarbonate dissolved in lukewarm

water. The interior and accessories should be thoroughly

dried, after the cleaning process has been completed.

o There can be an odour when you first switch on the

appliance. It will lessen as the appliance starts to cool.

During First Use

IMPORTANT: When you use the Wine Cooler for the rst time or restart the

appliance after it has been turned off for a long time, there could be a

few degrees variance between the temperature you select and the one

indicated on the LED display. This is normal and it is due to the length of

activation time. Once the Wine Cooler has been running for a few hours

everything will be back to normal.