Candy CCVB 30/1 Инструкция по эксплуатации онлайн [9/149] 599764

 Temperature Recollection Function

In the event of a power interruption, wine chiller can remember the previous temperature settings,

and when the power is recovery, the cooler temperature will go back the same setting temperature

as power off.

 Internal light

In order to reduce energy consumption, this wine cabinet will automatically switch off the LED lights

after 10 minutes.

If you want the LED light to remain on continuously, this is possible. Please press and hold the

"LIGHT" button for 5 seconds, the display will show "LP".After 4 seconds the display will revert back

to normal and the light will remain on until manually switched off.

If you want to revert back and conserve energy (recommended), please press and hold the "LIGHT"

button for 5 second, the display will show "LF",after 4 seconds the display will revert back to normal,

and the light will automatically switch off after 10 minutes.

 Shelves

• To prevent damaging the door gasket, make sure to have the door all the way opened when

pulling shelves out of the rail compartment.

• For easy access to the storage content, you must pull the shelves approximately 1/3 out of the

rail compartment, however this unit was designed with a notch on each sides of the shelf tracks

to prevent bottles from falling.

• When removing any of these shelves out of the rail compartment, To fit or remove the shelf, tilt

the shelf as per the diagram and simply pull out, or push in the shelf until it sits on the support

brackets securely.

 NOTE:

• If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting

the unit. If you attempt to restart before this time delay, the Wine cooler/beverage cooler will

not start.

• When you use the Wine cooler/beverage cooler for the first time or restart the Wine

cooler/beverage cooler after having been shut off for a long time, there could be a few degrees

variance between the temperature you select and the one indicated on the LED readout. This is

normal and it is due to the length of the activation time. Once the Wine cooler/beverage cooler

is running for a few hours everything will be back to normal.