Ghibli POWER WD 80.2 I TMT [20/72] Cleaning and maintenance

Ghibli POWER WD 80.2 I TMT [20/72] Cleaning and maintenance
www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
ENGLISH -
4
CLEANING AND
MAINTENANCE
DANGER:
Before performing any main-
tenance operation, unplug the
appliance from the electrical
socket.
Removing and replacing the paper
dust collection bag (if present)
- Release the levers (8 Fig. 3) and remove
the cover (9 Fig. 4) complete with motor
unit and floater-holder (46 Fig. 4).
- Remove the polyester filter (10 Fig. 5).
- Remove the paper bag for collecting dust
(11 Fig. 5), and replace it as described
above.
- Reassemble all the parts by following the
dismantling process steps in the reverse
order.
Emptying the recovery tank
- Release the levers (8 Fig. 3) and remove
the cover (9 Fig. 4) complete with motor
unit and floater-holder (46 Fig. 4).
- Place it on the top of a drain and empty
the liquid in the recovery tank (35 Fig.
21).
- Clean the inside of the tank with running
water and then re-install everything doing
the opposite of the disassembly.
For machines equipped with drain
hose
- Release the exhaust tube (36 Fig. 22)
from its base.
- Unscrew the button (37 Fig. 23), re-
move the cap (38 Fig. 23) of the ex-
haust hose (36 Fig. 24) and drain the
liquid in the recovery tank (35 Fig.
24).
For devices with rocking tank
- Release the levers (8 Fig. 3) and re-
move the cover (9 Fig. 4) complete
with motor unit and floater-holder (46
Fig. 4).
- Remove the tank locking device by
acting the lever (39 Fig. 25) if any
- Lift the tank (35 Fig. 26) with the ap-
propriate lever (40 Fig. 26) until com-
pletely emptied.
- Replace everything doing the oppo-
site of the disassembly.
Daily cleaning
Checking and cleaning the polyester
filter (if present)
- Release the levers (8 Fig. 3) and remove
the cover (9 Fig. 4) complete with motor
unit and floater-holder (46 Fig. 4).
- Remove the polyester (11 Fig. 5) filter.
- Clean the filter (Fig. 27) from the inside
out with a blast of air.
- Reassemble all the parts by following the
dismantling process steps in the reverse
order.
Cleaning the appliance
- Clean the unit body with a cloth damp-
ened with water or a mild detergent.
- Remove the top, as described above and
clean the inside with running water and
then empty it, as indicated above.
Replace everything doing the opposite of
the disassembly.
DANGER:
Do not wash the appliance us-
ing jets of water.
PROBLEM CAUSE SOLUTION
The vacuum cleaner does
not work.
Switch not pressed.
Plug not inserted.
No current.
Press the switch.
Insert the plug into the sock-
et.
Check the power supply line.
Suction is not satisfactory. Paper bag full.
Filter elements clogged.
Accessories or tubes
clogged.
Suction nozzle squeegee
worn or damaged.
Replace the dust bag.
Clean the filter elements.
Check and clean the flexible
hose and the suction nozzle.
Check and replace the
squeegee.
Manuale POWER LINE_8050814_1ed_01-2019.indd 4 27/02/19 09:31

Содержание

Похожие устройства

Скачать