Daikin FDKS60C7VMB [9/28] Preparation before operation

Preparation Before Operation

■ To operate the remote

controller

• To use the remote controller, aim the transmitter

at the indoor unit. If there is anything to block

signals between the unit and the remote

controller, such as a curtain, the unit will not

operate.

•

Do not drop the remote controller. Do not get it wet.

• The maximum distance for communication is

about 4m.

■ To fix the remote controller

holder on the wall

1. Choose a place from where the

signals reach the unit.

2. Fix the holder to a wall, a pillar, etc.

with the screws supplied with the

holder.

3. Place the remote controller in the

remote controller holder.

ATTENTION

■

About remote controller

•

Never expose the remote controller to direct sunlight.

•

Dust on the signal transmitter or receiver will reduce the sensitivity. Wipe off dust with soft cloth.

•

Signal communication may be disabled if an electronic-starter-type fluorescent lamp (such as

inverter-type lamps) is in the room. Consult the shop if that is the case.

•

If the remote controller signals happen to operate another appliance, move that appliance to

somewhere else, or consult the shop.

Receive

Remote controller

holder

Set.

●

To remove, pull it upwards.