Kenwood TK-2306 [16/18] Voice operated transmission vox

VOICE OPERATED TRANSMISSION (VOX)

VOX operation allows you to transmit hands-free. This feature

must first be activated by your dealer, and can only be used if

you are using a supported headset.

To activate VOX and set the VOX Gain level, perform the

following steps:

1 Connect the headset to the transceiver .

• The VOX function does not activate when a headset is not

connected to the accessory terminal of the transceiver.

2 With the transceiver power OFF, press and hold the Side 1

key while turning the transceiver power ON.

3 Continue to hold the Side 1 key until a beep sounds.

• The LED indicator lights orange.

• When the

Side 1 key is released, the transceiver announces the

VOX Gain level.

4 Press the Side 1 key to increase the VOX Gain level and

the Side 2 key to decrease the level.

• The VOX Gain can be adjusted from levels 1 to 10 and OFF.

• The transceiver announces the VOX Gain level as you adjust it.

If OFF is selected, a beep sounds.

5 Press the PTT switch to save the setting.

• A beep will sound.

• The transceiver announces the new VOX Gain level.

6 Turn the transceiver power OFF and the ON again to

activate VOX.

Note: If a headset is connected to the transceiver while the VOX

function is switched ON and the VOX Gain level is configured to a

higher, more sensitive level, louder received signals may cause the

transceiver to start transmission.