Sinbo SCM 2926 [17/69] Making cappuccino

- 16 -

MAKING CAPPUCCINO

6. Pour the frothed milk into the espresso prepared, now the cappuccino is ready. Sweeten

to taste and if desired, sprinkle the froth with a little cocoa powder.

7. Press and release the ON/OFF button to the higher position which is the “

OFF

” position

to cut off the power source.

PRODUCING STEAM TO HEAT LIQUIDS OR FROTH MILK SINGLY

The steam wand can be used to froth milk singly or make hot beverages like drinking

chocolate, water or tea.

Method:

1. Remove the detachable tank and fill it with desired water, the water level should not

exceed the “MAX” mark in the tank. Then place the tank into the appliance properly.

2. Then connect the appliance to power supply source.

3. Press down the ON/OFF button to the lower position which is the “

” position, the

red indicator is illuminated.

4. Turning the coffee/steam knob to the “

” position and waiting for a moment, the

appliance begins to be heated until the green indicator is illuminated, it shows the heating

is finish.

5. Dip the steam wand with plastic sleeve into the liquid to be heated or the intended

froth milk. Turn the coffee/steam knob to the “

” position and start making steam.

6. When the required temperature is reached or the frothing milk is obtained, you can

turn the coffee/steam knob to the “

” position.

7. Press and release the ON/OFF button to the higher position which is the “

OFF

” position

to cut off the power source.

CLEANING AND MAINTENANCE

1. Cut off power source and let the coffee maker cool down completely before cleaning.

2. Clean housing of coffee maker with moisture-proof sponge often and clean water tank,

drip tray and removable shelf regularly then dry them.

Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water

for cleaning.

3. Detach the metal funnel by turning it clockwise, get rid of coffee residue inside, then

you can clean it with cleanser, but at last you must rinse with clear water.

4. Clean all the attachments in the water and dry thoroughly.