Sinbo SCM 2937 [14/76] Before the first use

- 13 -

BEFORE THE FIRST USE

position.

Note: the appliance is not equipped with jug, please use yourself jug or coffee cup.

5. Connect to power source, turn the ON/OFF switch to the “—” position. The power

indicator will be illuminated.

6. Turn the coffee switch to the “—” position, the pump will pump water, when there is

water flowing out and turn the coffee switch to the “O” position, turn the steam switch

to the “O” position and waiting for a moment, the appliance begins to be pre-heated until

the ready indicator is illuminated, it shows the pre-heating is finished. Turn the coffee

switch to “I” position again, and water will flow out.

7. After water not dropping out any more, you can pour the water in each container out

then clean them thoroughly, now you can start brewing.

Note: There may be noise when pumping the water on the first time, it is normal, the

appliance is releasing the air in the appliance. After about 20s, the noise will disappear.

PRE-HEATING

To make a cup of good hot Espresso coffee, we recommend you preheating the appliance

before making coffee, including the funnel, filter and cup, so that the coffee flavour can

not be influenced by the cold parts.

Note: The appliance is equipped with two steel meshes of coffee powder mesh and coffee

pod mesh. Select desired steel mesh according to your desired.

1. Remove the detachable tank and open the tank cover to fill it with desired water, the

water level should not exceed the “MAX” mark in the tank. Then place the tank into the

appliance properly.

2. Set coffee powder mesh into metal funnel, then insert the funnel into the appliance

from the “Insert” position and release the press bar, and you can fix them into coffee

maker firmly through turn it anticlockwise until it is at the lock position.(See fig. 1).

3. Place an espresso cup (your cup) on removable shelf.

4. Then connect the appliance to power supply source. Make sure the steam control knob

is on the minimum position.

5. Turn the ON/OFF switch to the “—” position, the power indicator will be illuminated,

make sure the steam switch on the “O” position. Turn the coffee switch to the “—”

position, when there is water flowing out, turn the coffee switch to the “O” position

immediately. The purpose of the step is to pump the water of the tank into the housing.

6. When the ready indicator is illuminated, you should turn the coffee switch to the “—”

position again, there will be hot water flowing out. When the ready indicator is extinguished,

turn the coffee switch to the “O” position. The pre-heating is finished.

MAKE ESPRESSO COFFEE

1. Remove the metal funnel by turning it in clockwise, set coffee powder mesh into metal

funnel. Add ground coffee to the mesh with measuring spoon, a spoon ground coffee

power can make about a cup of top-grade coffee, then press the ground coffee powder

tightly with the tamper. If you use the coffee pod, you shall use the coffee pod mesh

instead of the coffee powder mesh.