Tecnoclima BESST/R 21 [19/40] Cle cleaning
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Tecnoclima BESST/R 21 [19/40] Cle cleaning

Tecnoclima BESST 31 [19/40] Cle cleaning
19
In case of power failure for less than four hours, after
restoring the unit, keep it powered but switched off for the
same number of hours the power failed
It is recommended to switch the operating mode only once a
day.
INACTIVITY FOR A LONG PERIOD INACTIVITY FOR A LONG PERIOD
If you are not going to use the equipment for a long time, please
do the following:
– Switch off the equipment, whatever its operating mode, using
the control panel
– Turn OFF the remote switch (if present)
After switching off the equipment:
– Switch off the internal terminal units by turning off the switch
of each appliance
– Turn OFF the main system circuit breaker
– Close the water taps
To put the equipment back into operation after a long
downtime, ask for the intervention of the manufacturer’s
Technical Support Service .
Should the unit be connected in parallel to a boiler, close
the equipment cocks during the boiler operation. The
temperature of the circulating water inside the heat pump
should never exceed 60°C.
If the outside temperature can drop below zero, there is a
danger of freezing.
The hydraulic system MUST BE DRAINED or an
antifreeze liquid (such as ethylene glycol) must be added
to it according to the doses recommended by the liquid’s
manufacturer. Please, contact the manufacturer’s
Technical Support Service on the matter.
CL CLE CLEANING
The only cleaning operation which the user must perform
concerns the chiller external panels which must be only cleaned
using a cloth dampened with water and soap. In the event of
resisting stains, dampen the cloth with a 50% mix of water and
denaturated alcohol or with specific products. After the cleaning,
carefully dry the surfaces.
Do not use sponges impregnated with abrasive products or
powder detergents
Do not perform any cleaning or maintenance before
disconnecting the appliance from the mains (by turning OFF
the main system circuit breaker)
MAINTENANCE
Periodical maintenance is essential to keep the equipment effective,
safe and reliable over time.
It can be done, every six months for some interventions and
every year for others, by the manufacturer’s Technical Support
Service which is technically skilled and trained and provided
with genuine spare parts, if necessary..
For equipment installed near the sea, maintenance intervals
must be cut by half.
Do not perform any maintenance before disconnecting the
appliance from the mains (by turning OFF the main all-pole
system circuit breaker).
USEFUL INFORMATION
Seller:…………………………………………………………..
Street …………………………………………………………………...
Phone.
…………………………………………………………………..
Installer: ………………………………………………………...
Mr. …………………………………………………………………..
Street ……………………………………………………………………
Phone.
……………………………………………………………………
Technical Support Service: ……………………………………….
Mr.…………………………………………………………………………..
Street…………………………………………………………………………...
Phone.……………………………………………………………………………
DATE INTERVENTION

Содержание

Похожие устройства

Скачать