Daikin FBQ48EAVMK [8/32] Operation procedure
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Daikin FBQ48EAVMK [8/32] Operation procedure

Daikin FBQ48EAVMK [8/32] Operation procedure
6 English
Operate in the following order.
OPERATION MODE
SELECTOR
Press OPERATION MODE SELECTOR
but
ton several times and select the
OPERA
TION MODE of your choice as
follows.
COOLING OPERATION ........................ “ ”
HEATING OPERATION ......................... “ ”
AUTOMATIC OPERATION .................... “ ”
• In this operation mode, COOL/HEAT
changeover is automatically carried out.
FAN OPERATION.................................. “ ”
DRY OPERATION ................................. “ ”
• The function of this program is to decrease the
humidity in your room with the minimum
tem
perature decrease.
• Micro computer automatically determines
TEMPERATURE and FAN SPEED.
• This system does not go into operation if the
room temperature is below 16°C.
Refer to figure 3 on page [1]
ON/OFF
Press ON/OFF button
OPERATION lamp lights up or goes off and the
sys
tem starts or stops OPERATION.
For programming TEMPERATURE and FAN
SPEED, follow the procedure shown below.
TEMPERATURE SETTING
Press TEMPERATURE SETTING button and
program the setting temperature.
Each time this button is pressed, setting
temperature rises 1°C.
Each time this button is pressed, setting
temperature lowers 1°C.
• The setting is impossible for fan operation.
NOTE
• The setting temperature range of the remote
con
troller is 16°C to 32°C.
COOLING, HEATING, AUTOMATIC, FAN,
AND PROGRAM DRY OPERATION
1
2
ADJUSTMENT
01_EN_3PN07753-14T.fm Page 6 T hursday, January 13, 2011 3:54 PM
Refer to figure 1 on page [1]
• To protect the unit, turn on the main power switch
6 hours before operation.
• If the main power supply is turned off during
oper
ation, operation will restart automatically
after the
power turns back on again.
6. OPERATION PROCEDURE
12
TIMER MODE START/STOP BUTTON
Refer to “PROGRAM TIMER OPERATION”.
13
TIMER ON/OFF BUTTON
Refer to “PROGRAM TIMER OPERATION”.
14
INSPECTION/TEST OPERATION BUTTON
This button is used only by qualified service
persons for maintenance purposes.
15
PROGRAMMING TIME BUTTON
Use this button for programming “START and/
or STOP” time.
16
TEMPERATURE SETTING BUTTON
Use this button for SETTING TEMPERATURE.
17
FILTER SIGN RESET BUTTON
Refer to “HOW TO CLEAN THE AIR FILTER”.
18
FAN SPEED CONTROL BUTTON
Press this button to select the fan speed,
HIGH or LOW, of your choice.
19
OPERATION MODE SELECTOR BUTTON
Press this button to select OPERATION MODE.
NOTE
• For the sake of explanation, all indications are
shown on the display in figure 1 contrary to
actual running situations.
FAN SPEED CONTROL
Press FAN SPEED CONTROL button.
High or Low fan speed can be selected.
The microchip may sometimes control the fan speed
in order to protect the unit.
Characteristics of the cooling operation
(cool
ing operation and automatic cooling
operation)

Содержание

Похожие устройства

Скачать