Binatone JE-8500 [4/27] Juice extractor je 8500

Binatone JE-8500 [4/27] Juice extractor je 8500
44
44
4
Juice Extractor JE-8500
Please read the safety instructions carefully before using this
appliance.
Please retain the instructions for future refer- Please retain the instructions for future refer-
Please retain the instructions for future refer- Please retain the instructions for future refer-
Please retain the instructions for future refer-
ence.ence.
ence.ence.
ence.
DESCRIPTION OF THE
APPLIANCE
Pic. A:
1. Small pusher
2. Large pusher
3. Feeder tube
4. Grater/filter
5. Pulp container
6. Anti-drip system (juice stopper)
7. Juice spout
8. Safety clamps
9. Body
10.Rubber foot
11.Driving shaft
12.Three-position switch «0/I/II»
BEFORE USE
! Remove all packing materials from the ap-
pliance.
! Wipe the appliance body with soft damp cloth,
thoroughly wash all the appliance parts com-
ing into contact with food.
OPERATING INSTRUCTIONS
Assembly
1. Place the juice extractor on dry level surface.
Make sure than the switch (12) is in «0»
position.
2. Install the pulp container (5), by matching
the juice spout (7) with the groove on the
body (9).
3. Put the grater/filter (4) inside the pulp container (5) so that it
completely fits into the driving shaft (11) until click. Check that
the grater/filter (4) rotates freely. Put the feeder tube (3) above.
4. Insert the feeder tube (3) into the pulp container (5) matching the
projections on the feeder tube (3) with the safety clamps (8).
5. Lift the safety clamps (8) and put them down so that they lock on
the projections of the feeder tube (3).
Note: The juice extractor has a safety system. If the safety
lock (8) is not securely fastened, the appliance will
not operate.

Содержание

Juice Extractor JE 8500 Please read the safety instructions carefully before using this appliance Please retain the instructions for future refer ence DESCRIPTION OF THE APPLIANCE Pic A 1 Small pusher 2 Large pusher 3 Feeder tube 4 Grater filter 5 Pulp container 6 Anti drip system juice stopper 7 Juice spout 8 Safety clamps 9 Body 10 Rubber foot 11 Driving shaft 12 Three position switch 0 1 11 BEFORE USE Remove all packing materials from the ap pliance Wipe the appliance body with soft damp cloth thoroughly wash all the appliance parts com ing into contact with food OPERATING INSTRUCTIONS Assembly 1 Place the juice extractor on dry level surface Make sure than the switch 12 is in 0 position 2 Install the pulp container 5 by matching the juice spout 7 with the groove on the body 9 3 Put the grater filter 4 inside the pulp container 5 so that it completely fits into the driving shaft 11 until click Check that the grater filter 4 rotates freely Put the feeder tube 3 above 4 Insert the feeder tube 3 into the pulp container 5 matching the projections on the feeder tube 3 with the safety clamps 8 5 Lift the safety clamps 8 and put them down so that they lock on the projections of the feeder tube 3 Note The juice extractor has a safety system If the safety lock 8 is not securely fastened the appliance will not operate

Скачать
Случайные обсуждения

Ответы 1

Не могу снять приёмник ягод.
2 года назад