Binatone JE-8500 [5/27] Care and cleaning

Binatone JE-8500 [5/27] Care and cleaning
55
55
5
ENGLISH
6. Place any juice cup under the juice spout (7).
7. In order to stop juice dripping after the operation there is a juice
stopper (6): lift the juice spout (7) matching the ledge on it with
the anti-drip hole (6).
Disassembly
1. Make sure that the appliance is switched off and unplugged
from electrical outlet.
2. Take both pushers (1, 2) out of the feeder tube (3). Lift the
safety clamps (8) and move aside and down.
3. Remove the feeder tube (3). Then remove the grater/filter (4).
4. Unfasten the pulp container (5). Remove the juice spout (7).
Operation
1. Assembly the appliance (See «Assembly») and plug it in. Before
plugging in make sure that the switch (12) is in «0» position
and that the safety lock (8) is properly locked.
2. Wash the food before processing. You may process the whole
small-size fruits and vegetables (carrots, small apples, toma-
toes). It is necessary to cut large-size fruits and vegetables into
pieces of such a size that they freely pass into the feeder tube (3).
3. Switch on the juice extractor by selecting the required speed «I»
or «II» with the help of the switch (12). In order to operate the
juice extractor efficiently, use the first speed when extracting
juice from soft food (for example, tomatoes); and the second
speed is recommended when processing hard food (such as
carrots).
4. Lower the fruits or vegetables into the feeder tube (3), carefully
pushing them with the pusher; in so doing the motor should
run. Do not push the food into the juice extractor using excessive
force. This will merely reduce the appliance’s efficiency.
5. If in the course of operation the pulp container (5) becomes full,
switch off the juice extractor, disassemble it and clean the con-
tainer from pulp. Assemble the appliance to continue operation.
6. After you finish, immediately wash the juice extractor and thor-
oughly dry its parts.
CARE AND CLEANING
1. Unplug the juice extractor from the electrical
outlet and disassemble it (see «Disassembly»).
2. Wipe the appliance body with soft damp
cloth. Never immerse the appliance body
and power cord in water or any other
liquid.
3. Wash the remaining parts of the juice extrac-
tor in soapy water with a soft sponge. Do not use stiff brushes
and abrasive cleaners. The lid, separating unit, grater/filter,
pulp container are dishwasher-safe.
4. When extracting juice from such food as carrots, etc. the plastic
parts of the juice extractor coming into contact with food may
become stained. To clean the stains, wipe the parts with cloth
moistened with a small amount of vinegar diluted by water –

Содержание

Disassembly 1 Make sure that the appliance is switched off and unplugged from electrical outlet 2 Take both pushers 1 2 out of the feeder tube 3 Lift the safety clamps 8 and move aside and down 3 Remove the feeder tube 3 Then remove the grater filter 4 4 Unfasten the pulp container 5 Remove the juice spout 7 Operation 1 Assembly the appliance See Assembly and plug it in Before plugging in make sure that the switch 12 is in 0 position and that the safety lock 8 is properly locked 2 Wash the food before processing You may process the whole small size fruits and vegetables carrots small apples toma toes It is necessary to cut large size fruits and vegetables into pieces of such a size that they freely pass into the feeder tube 3 3 Switch on the juice extractor by selecting the required speed 1 or 11 with the help of the switch 12 In order to operate the juice extractor efficiently use the first speed when extracting juice from soft food for example tomatoes and the second speed is recommended when processing hard food such as carrots 4 Lower the fruits or vegetables into the feeder tube 3 carefully pushing them with the pusher in so doing the motor should run Do not push the food into the juice extractor using excessive force This will merely reduce the appliance s efficiency 5 If in the course of operation the pulp container 5 becomes full switch off the juice extractor disassemble it and clean the con tainer from pulp Assemble the appliance to continue operation 6 After you finish immediately wash the juice extractor and thor oughly dry its parts CARE AND CLEANING 1 Unplug the juice extractor from the electrical outlet and disassemble it see Disassembly 2 Wipe the appliance body with soft damp cloth Never immerse the appliance body and power cord in water or any other liquid 3 Wash the remaining parts of the juice extrac tor in soapy water with a soft sponge Do not use stiff brushes and abrasive cleaners The lid separating unit grater filter pulp container are dishwasher safe 4 When extracting juice from such food as carrots etc the plastic parts of the juice extractor coming into contact with food may become stained To clean the stains wipe the parts with cloth moistened with a small amount of vinegar diluted by water 5 ENGLISH 6 Place any juice cup under the juice spout 7 7 In order to stop juice dripping after the operation there is a juice stopper 6 lift the juice spout 7 matching the ledge on it with the anti drip hole 6

Скачать
Случайные обсуждения

Ответы 1

Не могу снять приёмник ягод.
2 года назад