Binatone SI-2600 [6/38] Instructions for use

Binatone SI-2600 [6/38] Instructions for use
6
Note: if your area has hard water, we recommend you use
filtered or bottled water.
Attention: always disconnect the iron from the electricity
mains supply prior to filling the tank (5). Do not
overfill the tank (see the “Max” mark on the tank
(5). Do not fill the tank (5) with other liquids.
Prior to first use iron a clean old piece of cotton cloth to make
sure the sole plate and the water tank are absolutely clean
(see subsection “Steam ironing”).
Note: light smoke may emit during the first use of the
appliance: it is a normal occurrence that will soon
disappear.
INSTRUCTIONS FOR USE
1. Place the iron into a vertical position.
2. Insert the power plug (13) into the mains supply
outlet.
3. Turn the temperature control knob (10) to set
the temperature recommended by the manu-
facturer of the textile article (usually indi-
cated on the article’s label).
Note: in case the manufacturer’s recommendations are
missed, select the temperature setting, which
corresponds to the type of the cloth to be ironed (see
section “Useful advice”).
4. The operation indicator (11) will light up to indicate that the
iron is being heated to the set temperature level. When the set
temperature level is reached, the light indicator (11) will turn off.
Note: during operation of the appliance the light indicator
will light up and turn off periodically; this is normal
and not a malfunction.
Steam ironing
Dry ironing can be used at any temperature setting. To do this
the steam control knob (9) must be put into the “0” position. If
you intend to use the steam function, allow the iron to heat to the
required temperature level then put the control knob (9) into the
required position.
Attention: application of the steam ironing function is
impossible at “”temperature setting. SI-2610 iron:
the “Drip Stop” system automatically terminates the
steam generation process if the selected temperature
is too low. When the system is activated, you may
hear a click. SI-2600 iron: if the temperature is
insufficient to generate steam, water will start
dripping from the sole plate. To avoid this, always

Содержание

Note if your area has hard water we recommend you use filtered or bottled water Attention always disconnect the iron from the electricity mains sufiply prior to filling the tank 5 Do not overfill the tank see the Max mark on the tank 5 Do not fill the tank 5 with other liquids Prior to first use iron o cleon old piece of cotton cloth to moke sure the sole plate and the water tank are absolutely clean see subsection Steam ironing Note light smoke may emit during the first use of the appliance it is a normal occurrence that will soon disappear INSTRUCTIONS FOR USE Place the iron into a vertical position Insert the power plug 13 into the mains supply outlet Turn the temperature control knob 10 to set the temperature recommended by the manu facturer of the textile article usually indi cated on the article s label Note in case the manufacturer s recommendations are missed select the temperature setting which corresponds to the type of the cloth to be ironed see section Useful advice 4 The operation indicator 11 will light up to indicate that the iron is being heated to the set temperature level When the set temperature level is reached the light indicator 11 will turn off Note during operation of the appliance the light indicator will light up and turn off periodically this is normal and not a malfunction Steam ironing Dry ironing can be used at any temperature setting To do this the steam control knob 9 must be put into the 0 position If you intend to use the steam function allow the iron to heat to the required temperature level then put the control knob 9 into the required position Attention application of the steam ironing function is impossible at temperature setting SI 2610 iron the Drip Stop system automatically terminates the steam generation process if the selected temperature is too low When the system is activated you may hear a click SI 2600 iron if the temperature is insufficient to generate steam water will start dripping from the sole plate To avoid this always Biwitirue 6

Скачать