Binatone SI-2600 [7/38] Care and maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Binatone SI-2600 [7/38] Care and maintenance

Binatone SI-2600 [7/38] Care and maintenance
7
ENGLISH
put the steam control knob (9) into the “0” position
prior to ironing at low temperatures.
Turbo steam
To ease ironing of dense cotton, linen and upholstery articles
use the steam burst button (8): engagement of the button (8)
during the ironing process generates an extra burst of steam from
the sole plate to help remove stubborn creases.
Burst of steam in a vertical position
This function helps to freshen the appearance of curtains, jack-
ets, coats, etc. To use this function, take the following steps:
Follow instructions in paragraph 1-4 of the section “Operation
instructions”. While selecting the temperature setting, put the
temperature control knob (10) into the “Max” position.
While holding the iron in a vertical position, aim its sole plate
towards the articles to be ironed and push the steam burst
button (8) to produce a directional strong burst of steam from
the sole plate. Push the button several times with 5-7 seconds
intervals until the article is fully refreshed. If during the process
your water tank (5) runs out of water, disconnect the appliance
from the mains outlet, wait till it cools down, refill the tank and
plug the appliance back into the power supply and continue the
process.
Spray
Using the water spray (7) will help when ironing details of the
article (cuffs, trimmings, plackets, etc) or clothes, which demand
“·” (low temperature) ironing, when steam ironing is not possible.
Push the button several times to moisten the material.
5. When you have finished cleaning or ironing, do not forget to
switch the iron off by putting the steam control knob (9) into
the “0” position, the temperature control knob (10) — into
the “Min” position and unplugging the appliance from the
mains supply outlet.
CARE AND MAINTENANCE
Cleaning of the sole plate
The scale on the sole plate can be removed
with a rough cotton cloth dampened with a
vinegar solution.
Do not use any abrasive substances and
materials to clean the sole plate.
Cleaning of internal parts of the appliance
SI-2610 iron is equipped with an anti-scale function which
protects it from an accumulation of scale: it does this with a built-in
permanent filter. Therefore the water hardness is reduced and
the useful service life of the iron is extended.
Warning: in areas with very hard water it is recommended
that you regularly remove scale from the appliance to

Содержание

Похожие устройства

Turbo steam To ease ironing of dense cotton linen and upholstery articles use the steam burst button 8 engagement of the button 8 during the ironing process generates an extra burst of steam from the sole plate to help remove stubborn creases Burst of steam in a vertical position This function helps to freshen the appearance of curtains jack ets coats etc To use this function take the following steps Follow instructions in paragraph 1 4 of the section Operation instructions While selecting the temperature setting put the temperature control knob 10 into the Max position While holding the iron in a vertical position aim its sole plate towards the articles to be ironed and push the steam burst button 8 to produce a directional strong burst of steam from the sole plate Push the button several times with 5 7 seconds intervals until the article is fully refreshed If during the process your water tank 5 runs out of water disconnect the appliance from the mains outlet wait till it cools down refill the tank and plug the appliance back into the power supply and continue the process Spray Using the water spray 7 will help when ironing details of the article cuffs trimmings plackets etc or clothes which demand low temperature ironing when steam ironing is not possible Push the button several times to moisten the material 5 When you have finished cleaning or ironing do not forget to switch the iron off by putting the steam control knob 9 into the 0 position the temperature control knob 10 into the Min position and unplugging the appliance from the mains supply outlet CARE AND MAINTENANCE Cleaning of the sole plate The scale on the sole plate can be removed with a rough cotton cloth dampened with a vinegar solution Do not use any abrasive substances and materials to clean the sole plate Cleaning of internal parts of the appliance SI 2610 iron is equipped with on onti scole function which protects it from an accumulation of scale it does this with a built in permanent filter Therefore the water hardness is reduced and the useful service life of the iron is extended Warning in areas with very hard water it is recommended that you regularly remove scale from the appliance to 7 ENGLISH put the steam control knob 9 into the 0 position prior to ironing at low temperatures

Скачать