Bomann MA 431 CB [26/42] Cleaning

Using the Machine

First Use of the Machine

• Clean the machine before using it for the ﬁ rst time as described below under

„Cleaning“.

• Place the machine on a suitable working surface.

Handling

1. Set the cutting strength.

2. Place the food to be cut on the carriage and press it slightly in the direction of

the knife using the press.

3. Insert the mains plug into a correctly installed safety socket.

4. Press the On/Off switch to position „1“. The knife then turns.

5. Apply slight pressure to the carriage so that it runs smoothly backwards and

forwards.

A tip: If you would like to produce particularly thin slices, moisten the knife with a

damp cloth so as to prevent the food being cut from sticking to the knife.

Press

This should be placed on the carriage in order to press the material to be cut.

IMPORTANT:

Do not use the machine for more than 10 minutes without interruption.

Cleaning

• Disconnect the machine from the mains.

• Clean the machine after use with a slightly damp cloth. Then wipe dry.

• The carriage and press can be cleaned in soapy water.

This device has been tested according to all relevant current CE guidelines,

such as electromagnetic compatibility and low voltage directives, and has been

constructed in accordance with the latest safety regulations.

Subject to technical changes without prior notice!

6....-05-CB 431 Allesschneider 26 28.10.2004, 8:26:04 Uhr