Bomann KW 1413 CB Инструкция по эксплуатации онлайн [45/72] 74703

UNIT

By pressing the UNIT button in the weighing mode you can select between grams

(g) and ounces (oz).

Countdown Timer Function

• To set the timer, press the MODE button once brieﬂ y. The symbol „00:00“

appears in the display together with the letters „TMR“. Then keep the MODE

button pressed down until the seconds begin to ﬂ ash.

• When the UNIT button is pressed once the display jumps forward by one

second. Keeping the buttons pressed down starts the rapid advance function

until the desired time is reached. If the MODE button is pressed again the

minutes ﬂ ash in the display. Set the minutes with the UNIT button. Then press

the MODE button to start the countdown.

• Once „00:00“ has been reached an acoustic signal is heard, which switches

off automatically after approximately 30 seconds. The signal can be interrupted

with the MODE or the UNIT button. The display changes back to the time as

soon as the MODE button is pressed, or after approx. 20 sec.

• Press the UNIT button to brieﬂ y interrupt and then restart the countdown.

• If the MODE button is pressed during the countdown, the display changes to

the time and the timer continues to run in the background. In order to reset the

countdown back to „00:00“, please keep the UNIT button pressed down.

• If the MODE button is pressed ﬁ rst and then the UNIT button, the last timer

setting entered is shown.

The timer can be set in steps of one minute up to 99 minutes.

Weighing Function

1. Press the ON/TARE button to switch the device on. The display shows „0 g“

or „0,0 oz“.

2. Place the item to be weighed on the glass surface. The weight is now shown.

If further ingredients are placed on the weighing surface the weights are added

together.

3. If you would like to use an appropriate vessel, place it on the glass surface and

then press the ON/TARE button; the display is set to „0“. If the vessel is ﬁ lled,

only the weight of the ingredient is shown.

Weigh-in Function (TARA)

If you would like to weigh further ingredients for example, use the weigh-in function.

1. Press the ON/TARE button again.

2. Now put a further ingredient on the weighing surface. The actual weight of

the second ingredient is now shown in the display. Repeat this procedure if

necessary.

05-KW 1413 CB 45 14.03.2006, 10:27:19 Uhr