Daikin ALB04LBMNADBT00 Руководство по применению для пользователя онлайн [10/12] 609854

Modular-Light AHU

User Manual

7. In scheduler setting, pressing button will go back to the previous page. User can press this

button to exit the setting step by step. The time scheduler setting page is automatically closed if no

operation was performed for 1 minute, and all changes made after pressing button will not be

saved.

Temperature setpoint control

The buttons + or - are used to define Heat/Cool temperature setpoint.

By single pressing + or - buttons on main screen, the actual setpoint is being displayed. Every other

press increases/decreases the temperature setpoint of 0.1 °C.

A long press of the + or - buttons display the actual temperature offset determined with the room

unit from the main setpoint.

Fan speed control

This button allows the user to change actual control mode for Supply and Return fan.

To change fan speed control mode follow these steps:

1. Press Ventilation button

2. Navigate through the different available states by pressing + or – buttons:

- Auto = unit follows nominal fan setpoints

- Speed 1* = unit follows fixed speed 1 value

- Speed 2* = unit follows fixed speed 2 value

- Speed 3* = unit follows fixed speed 3 value

3. Confirm the change of state by pressing for at least 1 second the OK button

4. To return to the main screen page either press the Home button or wait for 5 seconds

*NOTE! if unit is in “Pressure Control” mode, only AUTO fan control mode will be available.

Cool/Heat changeover

This button allows the user to change Unit Cool/Heat state (or Summer/Winter state).

To change the Cool/Heat state follow these steps:

1. Press the Cool/Heat changeover button