Hitachi WH18DSL [7/104] ㅅ湧彗䠱㑄卌彅
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi WH18DSL [7/104] ㅅ湧彗䠱㑄卌彅

Hitachi WH18DSL [7/104] ㅅ湧彗䠱㑄卌彅
English
6
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed
or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord
suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool.
Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position
before connecting to power source and/or battery pack, picking up
or carrying the tool.
Carrying power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool
on.
A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your
application.
The correct power tool will do the job better and safer at the rate
for which it was designed.
b) Do not use the power tool if the switch does not turn it on and
off.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect
the power tools operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed.
Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one type of battery pack may create
a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs.
Use of any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal
objects like paper clips, coins, keys, nails, screws, or other small
metal objects that can make a connection from one terminal to
another.
Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power tool is maintained.
PRECAUTION
Keep children and infirm persons away.
When not in use, tools should be stored out of reach of children and infirm persons.
PRECAUTIONS FOR CORDLESS IMPACT
DRIVER
1. This is portable tool for tightening and loosenig screws. Use it only
for these operation.
2. Use the earplugs if using for a long time.
3. One-hand operation is extremely dangerous; hold the unit firmly with
both hands when operating.
4. After installing the driver bit, pull lightly out the bit to make sure that
it does not come loose. If the bit is not installed properly, it can come
loose during use, which can be dangerous.
5. Use the bit that matches the screw.
6. Tightening a screw with the impact driver at an angle to that screw
can damage the head of the screw and the proper force will not be
transmitted to the screw. Tighten with this impact driver lined up
straight with the screw.
01Eng_WH14DSL_EE 08/11/20, 19:186

Содержание

Похожие устройства

English 4 Power tool use and care GENERAL POWER TOOL SAFETY WARNINGS al Do not force the power tool Use the correct power tool for your application WARNING The correct potver tool will do the job better and safer at the rate Read all safety warnings and all Instructions for which it was designed Failure to follow the warnings and instructions may result in electric shock fire bl Do not use the power tool if the switch does not turn it on and and or serious injury off Any power tool that cannot be controlled with the switch is dangerous Save all warnings and instructions for future reference and must be repaired The term power tool in the warnings refers to your mains operated Icordedl cl power tool or battery operated cordless power tool Disconnect from 1 Work area safety Such Cluttered or dark areas invite accidents Do not operate power tools in explosive atmospheres such as children and bystanders away while a power outlets will reduce risk of with earthed or grounded surfaces such as the tools Check maintained cutting gl Use the power tool and the work to be performed tool outdoors use an or these instructions to misalignment any other or binding condition of that moving may affect damp these Use cl a tools with sharp cutting edges are less instructions taking and into tool bits account etc the in accordance working conditions location is unavoidable power tools only with specifically designated battery packs Use of any other battery packs may create a risk of injury and fire shock in tool a risk of fire when used with another battery pack cord bl tool the A charger that is suitable for one type of battery pack may create extension Use of a cord suitable for outdoor use reduces the risk of electric power starting al Recharge only with the charger specified by the manufacturer suitable for outdoor use a of 51 Battery tool use and care Damaged or entangled cords increase the risk of electric shock operating risk result in a hazardous situation Keep cord away from heat oil sharp edges or moving parts If the Use of the power tool for operations different from those intended could Water entering a paver tool will increase the risk of electric shock dl Do not abuse the cord Never use the cord for carrying pulling or unplugging the power tool power for accessories or grounded a power and with operating reduce likely to bind and are easier to control cl Do not expose power tools to tain or wet conditions fl with There is an increased risk of electric shock if your body is earthed When changing Many accidents are caused by poorly maintained power tools f Keep cutting tools sharp and clean electric p pes radiators ranges and refrigerators el power Properly contact adjustments If damaged have the power tool repaired before use matching shock body measures parts breakage of parts the power tools operation Do not use any adapter plugs with earthed Igroundedl power tools Avoid safety unfamiEar Maintain Never modify the plug in any way bl any Power tools are dangerous in the hands of untrained users el al Power tool plugs must match the outlet and making operate the power tool tool 21 Electrical safety plugs preventive persons operating Distractions can cause you to lose control Unmodified power source and or the battery pack before dl Store idle power tools out of the reach of children and do not allow Power tools create sparks which may ignite the dust or fumes Keep tool power tool accidentally in the presence of flammable liquids gases or dust cl plug from the power accessories or storing power tools al Keep work area clean and well Et bl the the When battery objects use metal a residual current device IRCDI protected supply like pack is paper clips coins can make objects that not in use keep keys a it away nails from screws connection from or other metal other small one terminal to another Use of an RCD reduces the risk of electric shock Shorting the battery terminals together may cause burns or a fire 31 Personal safety dl Under abusive conditions liquid may be ejected from the battery al Stay alert watch what you are doing and use common sense when avoid operating a power tool contact If contact accidentally occurs flush with water If liquid contacts eyes additionally seek medical help Do not use a power tool while you are tied or under the influence Liquid ejected from the battery may cause irritation or burns of drugs alcohol or medication A moment of inattention while operating paver tools may result in 61 Service al Have your power tool serviced by a qualified repair person using only serious personal injury bl Use personal protective equipment Always wear eye identical replacement parts protection This will ensure that the safety of the power tool is maintained Protective equipment such as dust mask nonskid safety shoes hard hat or hearing protection used for appropriate conditions will reduce PRECAUTION personal injuries Keep children and infirm persons away cl Prevent unintentional starting Ensure the switch is in the off position before connecting to power source and or battery pack picking When not in use tools should be stored out of reach of children and infirm persons up or carrying the tool Carrying power tools with your finger on the switch or energising potver tools that have the switch on invites accidents dl Remove any adjusting key or wrench before turning the power tool PRECAUTIONS DRIVER 1 on may result in personal injury Do not overreach Keep proper footing and balance at all times This enables better control of the power tool in unexpected situations fl Dress properly Do not wear loose clothing or jewellery Keep your and hair clothing and gloves away from moving parts If devices collection are provided facilities for ensure the these connection are of dust extraction connected and properly Use of dust cdleaim can reduce dust related hazards portable tool for tightening and IMPACT loosenig screws Use it only 2 3 4 Use the earplugs if using for a long time One hand operation is extremely dangerous hold the unit firmly with both hands when operating After installing the driver bit pull lightly out the bit to make sure that it does not come loose If the bit is not installed properly it can come loose during use which can be dangerous 5 Use the bit that matches the screw Loose clothes jewellery or long hair can be caught in moving parts gl is CORDLESS for these operation A wrench or a key left attached to a rotating part of the power tool el This FOR used 6 Tightening a screw with the impact driver at an angle to that screw can damage the head of the screw and the proper force will not be transmitted to the screw straight with the screw Tighten with this impact driver lined up

Скачать