![Haier AS09NS3HRA [7/13] It is advisable not to keep horizontal flap at downward position for a long time in coolor dry otherwise condensate water might occur](/img/pdf.png)
Haier AS09NS3HRA [7/13] It is advisable not to keep horizontal flap at downward position for a long time in coolor dry otherwise condensate water might occur
![Haier AS09BS4HRA [7/13] It is advisable not to keep horizontal flap at downward position for a long time in coolor dry otherwise condensate water might occur](/views2/1812978/page7/bg7.png)
Operation
Air Flow Direction Adjustment
Base Operation
Remote controller
Emergency operation and test operation
Emergency Operation:
Use this operation only when the remote controller is defective
or lost, and with function of emergency running, air conditoner
can run automatically for a while.
When the emergency operation switch is pressed, the " Pi "
sound is heard once, which means the start of this operation.
When power switch is turning on for the first time and
emergency operation starts, the unit will run automatically in
the following modes:
It is impossible to change the settings of temp. and fan speed,It
is also not possible to operate in timer or dry mode.
Pi
1.
temperature is below 16
o
C, do not use it in the
Test operation:
Use this switch in the test operation when the room
normal operation.
your finger from the switch: the cooling
Continue to press the test operation
switch for more than 5 seconds. After
you hear the "Pi" sound twice,
release
Test operation switch is the same as emergency switch.
operation starts with the air flow speed "Hi".
Under this operation mode,the fan motor of indoor
unit will run in high speed.
Pi Pi
Room
temperature
Designated
temperature
Timer
mode
Fan
speed
Operation
mode
Above 23
o
C 26
o
C AUTO COOL
No
When restart after remote turning off, the remote controller
When adjusting the flap by hand,turn off the unit.
When humidity is high,condensate water might occur
It is advisable not to keep horizontal flap at downward
position for a long time in COOLor DRY
otherwise, condensate water might occur.
adjusted to left or at air outlet if all vertical louvers are right.
mode ,
controller will automatically memorize the previous set swing position.
Note:
1.Status display of air flow
2.Left and right air flow adjustment
Pos.1
Pos.2
Pos.3
Pos.4
Pos.5
Pos.6
For each press of button, remote controller
displays as follows :
remote controller:
For each press of button, remote controller
displays as follows :
remote controller:
Cautions:
Remote controller:
Press
button
Every time the button is pressed, temp.setting
increase 1
o
C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
decrease 1
o
C,if kept depressed, it will
decrease rapidly
Select a desired temperature.
3.Fan function
2.Select temp.setting
Air conditioner is running under displayed fan speed.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.
Unit start
Press ON/OFF on the remote controller, unit starts.
/
changes as follows:
LOW
MED HI
Display
circulated
For each press button fan speed
In HEAT mode,warm air will blow out after a short
periodof the time due to cold-draft prevention function.
When FAN is set to AUTO, the air conditioner automatically
adjusts the fan speed according to room temperature.
Cooling only unit do not have displays and functions
related with heating
Remote
Controller
Note
COOL
DRY
HEAT
FAN
In DRY mode, when room temperature becomes
lower than temp.setting+2
o
C,unit will run intermittently
at LOW speed regardless of FAN setting.
Under the mode of auto operation, air conditioner will
automatically select Cool or Heat operation according
to room temperature.
air conditioner
automatically adjusts the fan speed
temperature.
When FAN is set to AUTO, the
according to room
In FAN operation mode, the unit will not operate in
COOL or HEAT mode but only in FAN mode ,AUTO is
not available in FAN mode.And temp.setting is disabled.
In FAN mode,SLEEP operation is not available.
Operation
Mode
AUTO
Press button to enter additional options, when
cycle display to , will flash. And then press
enter to FAN function.
SwingSwing
Temp+
Temp-
Health
Extra Function
Confirm/Cancel
Timer On
Timer Off
Sleep
Lock
Light
Reset
Turbo/Quiet Auto
Cool Heat Dry
1
3
2
2
4
Vertical flap
COOL/DRY:
HEAT:
Initial state
5
Содержание
- Keep this operation manual for future reference 1
- Lease read this operation manual before using the air conditioner 1
- Split type room air conditioner operation manual and indoor installation manual 1
- A leakage breaker must be installed make sure ground connection is correct and reliable 3
- Cautions 3
- Connecting cables break off it must be assured that the grouding wire is the last one to be broken off the breaker of the air conditioner should be all pole switch and the distance between its two contacts should not be no less than 3mm such means for disconnection must be incorporated in the wiring 3
- If the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard 3
- Make sure installation is done according to local wiring regulation by professional persons 3
- The type of connecting wire is h07rn f all the cables shall have got the european authentication certificate during installation when the 3
- The wiring method should be in line with the local wiring standard user maintenance shall not be made by children without supervision 3
- This appliance can be used by children aged 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given superivision or instruction concering use of the appliance in a safe way and understand the hazards involved children shall not play with the appliance cleaning and 3
- Warning 3
- Caution 4
- Cautions 4
- Check proper installation of the drainage securely 4
- Please call sales service shop for the installation do not attempt to install the air conditioner by yourself because improper works may cause electric shock fire water leakage 4
- Warning 4
- Accordance 5
- Before asking for service check the following first 5
- Conformity for the models 5
- Gwp global warming potential 5
- Important information rega rding the refrigerant used 5
- Trouble shooting 5
- Air purifying filter inlet 6
- Ambient temp display 6
- Anion generator 6
- Display board 6
- Emergency switch 6
- Extra function button 6
- Function 6
- Horizontal flap 6
- Indoor unit 6
- Inlet grille 6
- Inside 6
- Operation mode indicator 6
- Outdoor unit 6
- Outlet 6
- Parts and functions 6
- Power indicator 6
- Remote controller 6
- Remote signal receiver 6
- Timer mode indicator 6
- Vertical blade 6
- Air flow direction adjustment 7
- Base operation 7
- Cautions 7
- Emergency operation and test operation 7
- It is advisable not to keep horizontal flap at downward position for a long time in coolor dry otherwise condensate water might occur 7
- Operation 7
- When adjusting the flap by hand turn off the unit when humidity is high condensate water might occur 7
- Comfortable sleep 8
- Controller 8
- For a minute and then start adjusting by remote 8
- Healthy airflow operation 8
- In cool dry mode 8
- Modes are set up at the same time 8
- Operation 8
- Operation mode 8
- Setting the comfort work conditions 8
- According to the time setting sequence of timer on or 9
- After replacing batteries or a power failure happens time 9
- After unit starts select your desired operation mode 9
- Operation 9
- Press button 0 will appear after 10 seconds the time display will be blank 9
- Press button to change timer mode 9
- Press button to set time 9
- Setting should be reset 9
- Then select your desired timer mode timer on or 9
- Timer off either start stop or stop start can be achieved 9
- Timer off or will flash 9
- Timer on off on off operation 9
- Accessory parts 10
- Drawing for the installation of indoor units 10
- Indoor unit installation 10
- More than 10cm 10
- More than 15cm 10
- Necessary tools for installation power source 10
- Selection of installation place 10
- Selection of pipe 10
- Connecting the indoor outdoor electric cable 11
- Fixing the indoor unit body 11
- Indoor unit installation 11
- Left left rear piping 11
- Other direction piping 11
- Rear piping 11
- Removal of indoor unit body 11
- Removing the wiring cover 11
- Check for installation and test run 12
- Check items for test run 12
- Cutting and flaring work of piping 12
- On drainage 12
- Please kindly explain to our customers how to operate through the instruction manual 12
- Power source installation 12
- When connecting the cable after installing the indoor unit 12
- When connecting the cable before installing the indoor unit 12
- And the white side face the unit 13
- Attach air purifying filter 13
- Attach the filter 13
- Attach the standard air filter 13
- Clean the filter 13
- Close doors and windows during operation 13
- Close the grille surely 13
- Close the inlet grille 13
- Detach old air purifying filter 13
- Do not block the air inlet or outlet 13
- For smart use of the air conditioner 13
- If the unit is not to be used for a long time turn off the power supply main switch 13
- Maintenance 13
- Necessary installation 13
- Note air purifying filter is optional part 13
- Open the inlet grille by pulling it upward 13
- Please keep the bacteria killing medium air purifying filter in avoid long time directly sunshine when you stop using it or its ability of sterilization will be reduced 13
- Prop up the inlet grille by using a small device named grille support 13
- Purifying filter face outside 13
- Remove the filter 13
- Replacement of air purifying filter 13
- Setting of proper room temperature 13
- Slide the knob slightly upward to release the filter then withdraw it 13
- The bacteria killing medium air purifying filter will be used for a long time no need for replacement but in the period of using them you should remove the dust frequently by 13
- The cool and dry conditions 13
- The photocatalyst air purifying filter will be solarized in fixed time in normal family it will be solarized every 6 months 13
- Use the louvers effectively 13
- Use the timer effectively 13
- Using vacuum cleaner or flaping them lightly otherwise its performance will be affected 13
- Which located in the right side of the indoor unit 13
Похожие устройства
- Haier AS09NS3HRA Брошюра
- Haier AS12NS3HRA Инструкция по монтажу
- Haier AS12NS3HRA Инструкция по эксплуатации
- Haier AS12NS3HRA Руководство по эксплуатации
- Haier AS12NS3HRA Брошюра
- Haier AS15NS3HRA Инструкция по монтажу
- Haier AS15NS3HRA Инструкция по эксплуатации
- Haier AS15NS3HRA Руководство по эксплуатации
- Haier AS15NS3HRA Брошюра
- Haier AS18NS3HRA Инструкция по монтажу
- Haier AS18NS3HRA Инструкция по эксплуатации
- Haier AS18NS3HRA Руководство по эксплуатации
- Haier AS18NS3HRA Брошюра
- Haier AS24NS3HRA Инструкция по монтажу
- Haier AS24NS3HRA Инструкция по эксплуатации
- Haier AS24NS3HRA Руководство по эксплуатации
- Haier AS24NS3HRA Брошюра
- Haier AS07BS4HRA Инструкция по монтажу
- Haier AS07BS4HRA Инструкция по эксплуатации
- Haier AS07BS4HRA Руководство по эксплуатации