DOD F700HD [6/14] Charging via charger

Charging via Charger

Charging via USB port of computer

Install SDHC card

Connect the USB cable, one end connects to USB port of the charger and the

other end connect to USB port of camcorder, charging will start immediately.

Use USB cable to connect to USB port of computer to start charging

1. Turn open the screw and push the SDHC cap up to open, insert the memory card into the slot

until the card is tightly fixed, pushes the SDHC cap downward and turn the screw close to

complete the installation.

2. Press lightly on the memory card to take out the card, wait till the card spring out and remove

the card.

Unique Split Design:

provided with especially designed

connection cable for host device and

extended device, when connected it is very

convenient to make recording in different

position and different angle.

※ Notes：When charging (by charger or computer port), switch ON the power and confirm for charging,

select “CHARGE” appeared on the screen. At the same time the screen will shut down, it will take

8 hours to complete the charging.

※Notes：

1. To ensure normal usage of the device, please

make sure to use SDHC card only.

2. Please format the SDHC card when you use it

for the first time.

3. Please make sure the locker key of SD card is

locked before using.

4. Please make sure to insert the card in a right

direction, using opposite way to insert the card

might damage the device and card.

5. After you inserted the SD card, camcorder will

term the card as main storage, you will not be

able to access previously saved data. You will

be able to access the previously saved data

after you remove the SD card.

6. When using the SD card, please do not

remove it during operation, removing the card

during this time will result in lost or damage of

data.

HDMIPC