Haier AB182FCBHA [18/21] Installation procedure

3. PREPARATION FOR THE INSTALLATION

(1) Position of ceiling opening between unit and suspending bolt.

Distance between

suspending bolts 460mm

Overlap between ceiling and

ornament panel shall be 15mm

Suspending bolts

Ceiling

Ornament panel

(2) Cut an opening in ceiling for installation if necessary. (when ceiling already exists.)

(3) Install a suspending bolt.

(Use a M10 bolt)

To support the unit weight, anchor bolt shall be used in the case of already exists ceiling. For new

ceiling, use built-in type bolt or parts prepared in the field.

Before going on installing adjust space between ceiling.

Note: All the above mentioned parts shall be prepared in field.

Ceiling

50~100

Roof

Anchor bolt

Long nut

Suspending bolt

Refer to paper pattern for dimension of ceiling hole.

Connect all pipings (refrigerant, water drainage), wirings (inter unit cable) to indoor unit, before installation.

Cut a hole in ceiling, may be a frame should be used to ensure a smooth surface and to prevent vibration.

Contact your real estate dealer

630(Ornament panel)

600(Ceiling opening)

570(Indoor unit)

630(Ornament panel)

600(Ceiling opening)

570(Indoor unit)

Installation Procedure