Haier HW80-1479 [18/22] Display codes

17

To prevent blockage to the water supply by ingress of foreign

substances, clean the water inlet valve and inlet valve filter regularly.

Moving the machine

If the machine is to be moved to a distant lo on, replace the transpo on bolts removed before

in

on to prevent damage as shown below.

Long periods of disuse

If the washing machine is l idle for a long period, pull out the electrical plug and turn off the water

supply. Open the washer door to prevent form

on of moisture and odors. Let the door open while

Display Codes

Codes Causes Solu ons

Err1 Door is not properly shut. Shut the door properly, and then press the

Err4 Heater error (Appears at the end of a

cycle).

Contact the maintenance personnel.

Err5 Water level not met in 8 minutes.

The height of the drain hose is below 80

The drain hose is in water.

Make sure that tap is turned on, and water

pressure is normal.

If problem s ll exists, please contact the

maintenance personnel.

Install drain hose within 80-100 cm of

Make sure the drain hose is not in water.

If you normally use a washing machine detergent that doesn't contain bleach, then buy some detergent

that does, and use it for your maintenance washes. This will help kill off bacteria and prevent black mould

and grease.

Tip: Look for something like, "bleaching agents" in the ingredients. Do not put cleaning bleach (for example

“Domestos”) in the washing machine this will damage the machine. There are certain types of bleach

example oxygen bleaches like “Vanish” that are appropriate for laundry. To check if your washing machine

is being badly affected, carefully examine the inside of the door seal for slime. Pull the lip in front of the

drum and look underneath on lip of the tub as it can accumulate a slime, which causes smells, and rots

the seal.