Haier HW80-1479 [7/22] Before use

In on

Adjus ng the b om cover

Before removing the transpo on bolts, please ﬁx

the bo

om cover to the bo om of the washing

machine. Lay down the machine (ﬁg.1), unscrew the

feet and ﬁt the bo

om cover with the four holes

corresponding to the screw holes of the feet. Then

screw the feet back on through the cover and ﬁx it

thus securely to the bo

om of the machine (ﬁg 2.).

It keeps out the dampness and reduces the noise.

Dismantle the transport on bolts

The transpo on bolts are designed for clamping an -

vib

on components inside of the washing machine during

the transpo

on process.

Remove the back cover.

Remove the four bolts on the rear side and take out

the syn

c stabilizers from within the machine.

Replace the back cover.

Fill the holes le by the bolts with blanking plugs.

Note:

When you replace the back cover, the convex

must face to outside, and you have to insert the

back cover from the two gaps as shown in ﬁg.5.

Keep the transporta on bolts and synthe c

stabilizers in a safe place for later use.

Adjus ng the feet

There are adjustable feet under the bo om of the washing machine. Before

use, they should be adjusted so that the machine is level. This will minimize

vibr

ons and thus noise during use. It will also reduce wear and tear. We

recommend using a spirit level to level the appliance. The ﬂoor should be as

stable and ﬂat as possible.

Before Use