Haier HW80-DM14876TNZP [28/36] Installation

9-Installation

Following c

●

onnections are possible:

9.6.1 Drain hose to sink

Hang the drain hose with the U-support over the

edge of a sink with adequate size (Fig. 9-10).

ping.

9.6.2 Drain hose to waste water connection

The internal

●

diameter of the stand pipe with

vent-hole must be minimum 40 mm.

Put the drain hose for approx. 80 mm in the

wastewater pipe.

(Fig. 9-11).

9-10

9-11

CAUTION!

●

Drain hose is not to be extended. If necessary contact after sales service.

9.6.3 Drain hose to sink connection

The junction must lie above the siphon

A spigot connection is usually closed by a pad

That must be removed to prevent any disfunc -

tion (Fig. 9-12).

Secure the drain hose with a clamp.

9-12

9.6 Drain Water Connection

WARNING!

Use only the supplied hose set for the connection.

Never reuse old hose sets!

Only connect to cold water supply.

Before connection, check whether the water is clean and clear.

Protect the U-support sufficiently againsy slip-

Attach the U-support and secure it sufficiently

The drain hose should not be submerged in water and should be securely fixed

and leak-free.If the drain hose is placed on the ground or if the pipe is at a hei-

ght of less than 80cm, the washing machine will continuously drain while being

filled(self siphoning).