Haier HW80-IM12929CS3 [9/32] Note packaging disposal

2.3 Preparation

Take the appliance out from the packaging.

Remove all packing material including polystyrene base, keep them away from

the childrens. When removing th packaging, water drops may be seen on plastic

bag and porthole. This normal phenomenon results from water tests in the factory.

2.5 Dismantle the transit bolts

The transit bolts are designed to clamping the

components inside the

appliance during

transportation to prevent inner damage.

1. Remove the transit bolts.

2. Fill the holes with blanking

plugs (Fig.2-5).

Note: Packaging disposal

Keep all the packaging materials away from the childrens and dispose it in an

environmentally friendly manner.

2.4 Installation of bottom cover board

d a bottom

cover (2-4.1) . The board is used for reducing the

2-4

1. Lay down the washing machine to it’s back side,

bottom side towards the operator.

2. Insert the Bottom cover into the cabinet, then fixed

with 2 screws to the cabinet front side.

Then set the machine upright again (Fig.2-4).

On the top of the package

Tighten with

two screws

Front

Back

Hole wall

(

12345

)

Remove the four

packing bolts

Plug the five hole walls

Packing bolt

(

1234

)

2-5

2. Before Use

noise.