Brayer BR1107 Инструкция по эксплуатации онлайн [16/76] 625011

Brayer BR1107 Инструкция по эксплуатации онлайн [16/76] 625011
16
EN
Water type Cleaning frequency
Soft (ltered) water Every 80 co󰀨ee making cycles
Hard (tap) water Every 40 co󰀨ee making cycles
The buttons (5, 6, 7) light indicators ashing by rotation
will remind you about descaling.
You can use special descaling agents for espresso
co󰀨ee makers or co󰀨ee machines to remove scale.
You can also use table vinegar or citric acid solution (2
teaspoons of citric acid per 1 liter of water).
Follow the instructions on the usage of the descaling
agent, pour it into the water tank (10).
Install one of the co󰀨ee lters (19 or 20) into the lter
holder (18) matching the ledge on the lter (19 or 20)
with the hole on the holder (18) and turn the lter (19 or
20) counter/clockwise.
Place a cup of suitable height and capacity on the grid
(2).
Direct the cappuccinator pipe (13) into the cup using
the cappuccinator pipe angle adjustment bar (12).
Insert the power plug into the mains socket.
Switch the co󰀨ee maker on by setting the «0/I» power
switch (11) to the «I» position.
To switch the cleaning mode on, press simultaneously
the button (5) «Latte» and the button (7) «Espresso».
In the descaling mode the light indicators slowly ash
by rotation, after 30 minutes the light indicators will start
ashing faster. Remove the container (10), drain the
remaining descaling solution and ll the container (10) with
clean water. Install the container (10) back to its place.
Pour the descaling solution out from the cup, place the
cup on the grid (2).
Simultaneously the button (5) «Latte» and the button
(7) «Espresso» to continue cleaning the co󰀨ee maker.
In approximately 30 minutes the co󰀨ee maker cleaning
will be nished, and the co󰀨ee maker will switch to the
standby mode, all buttons (5, 6, 7) light indicators will glow
constantly.
Notes:
- You can temporarily switch the descaling notication
o󰀨 by pressing any of the buttons (5, 6, 7) and make
co󰀨ee. After the co󰀨ee making the co󰀨ee maker will
remind you about descaling again with ashing light
indicators.
- Do not delay descaling of the co󰀨ee maker for a long
time and perform cleaning as soon as possible.
CLEANING THE COFFEE MAKER
Unplug the co󰀨ee maker and wait until it cools down
completely.
Clean the co󰀨ee maker body with a soft, slightly damp
cloth and then wipe it dry.
Do not use abrasive cleaners and solvents to clean the
co󰀨ee maker body.
You can wash the co󰀨ee lters (19 and 20) in a
dishwashing machine. Clean the openings in the lters
(19, 20) with a small brush.

Содержание