Brayer BR1107 [15/76] Descaling

Brayer BR1107 [15/76] Descaling
15
EN
Turn the steam nozzle counterclockwise to the position
«
» and remove it from the cappuccinator (14) body
(pic. 11), wash the nozzle.
Set the cappuccinator pipe angle adjustment bar (12) in
vertical position, take the bar (12) and slightly sway, pull
the cappuccinator pipe (13) towards yourself, remove
the cappuccinator pipe (13) and wash it.
Grasp the left side and raise the silicone plug, rinse the
cappuccinator lid (14) under a warm water jet (pic. 12),
close the silicone plug.
Install the cappuccinator pipe (13) back to its place,
install the steam nozzle back to its place and turn it
clockwise to the position «
» (pic. 13).
Prepare the co󰀨ee maker as described in the chapters
above, but do not add ground co󰀨ee into the lter (19
or 20).
Place a cup of suitable height and capacity on the grid
(2).
Fill the container (16) with water, do not exceed the
maximal level mark.
Install the cappuccinator lid (14) on the container (16)
and install the cappuccinator back to its place until the
lock clicking.
Direct the cappuccinator pipe (13) into the cup using
the cappuccinator pipe angle adjustment bar (12).
Turn the frothed milk supply (intensity) control knob (15)
to the right to the position «
».
Switch the co󰀨ee maker on by setting the power switch
(11) «0/I» to the position «I», the indicator (5, 6, 7) will
light up and start ashing.
When the co󰀨ee maker is ready for operation, the light
indicator (5, 6, 7) will glow constantly.
Press and hold the «Latte»-button (5) for 3 seconds, the
indicators «
» and « » will light up.
After you nish using the co󰀨ee maker, switch the co󰀨ee
maker o󰀨 by setting the switch (11) «0/I» to the position
«0».
Wait until the co󰀨ee maker cools down, take the
container (16), pull it towards yourself and remove it (pic.
1), remove the cappuccinator lid (14) from the container
(16).
Pour the remaining water out of the container (16), wipe
the container with a dry cloth and dry the cappuccinator
lid (14).
Before assembling make sure that the cappuccinator lid
and the container are dry. Install the cappuccinator lid
(14) on the container (16) and install the cappuccinator
on the co󰀨ee maker.
DESCALING
Scale inside the boiler a󰀨ects the taste of ready co󰀨ee,
slows down the co󰀨ee making and reduces the service
life of the co󰀨ee maker.
Note that the thicker the scale, the more di󰀩cult it is to
remove, that’s why we recommen regularly removing
scale for e󰀨ective operation of the co󰀨ee maker (see the
table).

Содержание