Home
Главная
Brayer
Кухонный Комбайн
BR1503
Инструкция по эксплуатации Страница: 10

Brayer BR1503 Инструкция по эксплуатации онлайн [10/60] 625110

• This kitchen machine has been designed with

covers (1, 11) for the installation places of additional

attachments (included), the covers removed activate

the system preventing the kitchen machine switching-

on with no attachment installed. Always check the

correct covers installation before using this kitchen

machine (1, 11), otherwise it will not turn on.

• Hold the motor unit (2) with your hand and press the

lock lever (3), the motor unit (2) will be xed in the

upper position (pic. 1).

• Set the bowl lid (8) in its installation place (10).

• Turn the lid (8) to x it.

• Set the bowl (7) in its installation place (6) and turn it

clockwise (pic. 2).

• Install one of the attachments (12, 13 or 14) on the

shaft (9), to do this, slightly press the attachment

upwards and turn it counterclockwise until tight (g.

3, 4). Make sure that the attachment is properly xed.

• Place the required ingredients in the bowl (7).

• Press the lock lever (3) and hold it, press the upper

part of the motor unit (2), lower it to the operation

position and release the lever (3). Make sure that

the motor unit (2) is securely xed in the operation

position (pic. 5).

• Connect the power plug to an electrical outlet.

Note: Imake sure that the covers for the installation

places of additional attachments (1, 11) are correctly set

and xed.

• To activate the kitchen machine turn the operation

mode switch knob (4) clockwise and set the required

attachment rotation speed «1---10».

Note: when making yeast dough, use lower Dough

Hook (14) rotation speeds.

• Always start at a lower speed, then gradually

increase the attachment rotation speed

• You can add the required ingredients during the

operation through the opening in the lid (8).

• To switch the kitchen machine on for a short time,

turn the operation mode switch (4) to the "P" position.

For a short Kitchen Machine operation session, set

the Operation Mode Switch (4) to «Р» and hold it

down.

• Upon completion set the operation mode switch knob

(4) to the «0» position and disconnect the power plug

from the electrical outlet.

• Hold the motor unit (2) with your hand and press the

lock lever (3), the motor unit (1) will be xed in the

upper position (pic. 1).

• Remove the installed attachment by turning it

clockwise (g. 3).

• Turn the lid (8) and remove it.

• Remove the bowl (7) by turning it counterclockwise.

• Remove food from the bowl (7).

• Wash the used attachment and the bowl (7) with

warm water and a neutral detergent, rinse and dry.

Brayer BR1503 Инструкция по эксплуатации онлайн [10/60] 625110

Содержание

Похожие устройства