Home
Главная
Black & Decker
Пылесосы
GWC3600L20
Инструкция по эксплуатации Страница: 8

Black & Decker GWC3600L20 [8/12] Maintenance

ENGLISH

(Original instructions)

Note: It may take as long as 30 minutes to determine that

the battery is defective. If the battery is too hot or too

cold, the LED will alternately blink red, fast and slow, one

ash at each speed and repeat.

Switching on and off (g. E)

Warning! Use both hands to grip the product rmly when

switching on.

u To switch the appliance on, slide the on/off switch (5)

forward.

u To switch the appliance off, slide the on/off switch (5)

back.

Power commander (g. F)

The power command (6) feature is located on the tool handle.

It allows you to optimize the tools performance and boost the

power as needed.

u To choose max power, rotate dial to setting 6. (most

vacuuming tasks require max power.)

u To maximize runtime rotate dial to setting 1.

u For a combination of both, rotate dial from setting 2 to 5.

Using your product

Warning! When using as a blower or vacuum, always wear

safety glasses. If using in dusty conditions, wear a lter mask

as well.

Warning! Switch off your product, allow the fan to stop and

remove the battery before carrying out any adjustment, servic-

ing or maintenance.

Blow mode (g. G and H)

u Align the blow tube (1) with the Sweeper (g. G).

u Push the tube onto the sweeper until the lock (14)

engages tightly with the blow tube.

u Align the tabs of the fan cover (15) with the sweeper (g.

H).

u Push the fan cover into the sweeper until it engages tightly

with the sweeper.

u Hold the blow tube approximately 180 mm above the

ground, switch on the appliance and using a sweeping

motion from side to side, advance slowly keeping the

accumulated debris/leaves in front of you.

u Once you have blown the debris/leaves into a pile, you

can convert to vacuum mode to collect the debris.

Warning! Never operate in Blow mode without the blow tube

and lter cover rmly in place.

Removing the blow/vacuum tube (g. G and H)

u To disconnect the blow tube (1) press the lock button (14)

and pull the tube off, making sure that the tube does not

fall to the ground.

Warning! Never operate in Blow mode without the blow tube

and lter cover rmly in place.

Vacuum mode (g. I - L)

Note: For vacuuming/shredding, the collection bag (3) must

be tted.

u Remove the fan cover by pressing the release button (16)

(g. I)

u Align the collection bag tube (17) with the Sweeper (g. J).

u Push the tube onto the sweeper until the lock (14)

engages tightly with the collection bag tube.

u Attach the collection bag clip (18) to the collection bag

hook (19) on the bottom of the sweeper (g. K).

u Align the tabs of the vac tube (2) with the sweeper (g. L).

u Push the vac tube into the sweeper until it engages tightly

with the sweeper.

u Position the vac tube slightly above the debris/leaves.

Switch on the appliance and use a sweeping motion; the

debris/leaves will be sucked up the tube, shredded and

thrown into the collection bag.

u For stubborn debris/leaves your vacuum tube is tted

with a scraper. Use the scraper to loosen the debris and

continue to vacuum as normal.

u As the bag lls, the power of the suction will decrease,

switch off the appliance and unplug battery.

u Unzip the bag to empty the contents before continuing to

operate.

Warning! Warning! Never remove the collection bag without

rst turning off and removing the battery from the appliance.

Note: If the suction decreases and the bag is not full, the

vacuum tube is probably clogged with debris. Turn off and

remove the battery from the vacuum and clear the tube before

continuing.

Maintenance

Your Black & Decker appliance has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper appli-

ance care and regular cleaning.

u Switch off and unplug the appliance/tool.

u Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.

u Or run the battery down completely if it is integral and then

switch off.

u Unplug the charger before cleaning it. Your charger does

not require any maintenance apart from regular cleaning.

u Regularly clean the ventilation slots in your tool/appliance

and charger using a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

u Keep the appliance clean and dry.

Black & Decker GWC3600L20 [8/12] Maintenance

Содержание

Похожие устройства