Vitek VT-1656 [12/56] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-1656 [12/56] English

Vitek VT-1656 [12/56] English
• Press the (9) "MEMORY" button for confirmation.
• To recall the desired program from memory, press
the (9) "MEMORY" button and choose the program
number  "1", "2" or "3".
• Press the "START/+30SEC./CONFIRM" button to
begin the cooking process.
The display will show the remaining cooking time and
the corresponding symbols for set program.
When the cooking process has finished, the oven will
turn off and beep five times.
Note: "DEFROST" mode is not a food preparation pro
gram and cannot be saved into memory.
14. Quick cooking mode
Press the (11) "START/+30SEC./CONFIRM" button to
begin cooking at full power for 30 seconds; each con
secutive key press will add 30 seconds. The maximum
time that can be set is 99 minutes and 99 seconds.
Note: during the cooking process, time can be added
by pressing the "START/+30SEC./CONFIRM" button.
When cooking food in multistage mode and automatic
mode  time cannot be added.
When the cooking process has finished, the oven will
turn off and beep five times.
15. Viewing the current cooking mode
• During singlestage cooking, press the (2)
"MICROWAVE" button once; for 2 or 3 seconds the
display will show the current power level setting.
• During singlestage cooking, press the (4)
"CLOCK/PRESET" button to view the cook start
time. For 2 or 3 seconds, the display will show the
programmed cook start time.
16. Child lock function
To lock: press and hold the (6) "STOP/CLEAR" button
for 3 seconds; the oven will beep and the symbol (5) will
appear on the display.
To unlock: While locked, press and hold the
"STOP/CLEAR" button for 3 seconds; the oven will
beep and the symbol (5) will disappear.
17. Auto power level reduction function
During the cooking process if the oven operates for
more than 30 minutes at maximum power, it automati
cally reduces the power level to 80% of maximum.
Automatic power level reduction is necessary in order to
prevent overheating of the magnetron.
18. Indications on the display
• In standby mode, the display shows the current time
and the separation dots (9) blink.
• While entering information, the screen will display
the corresponding information and symbols.
• During the cooking process, the display will show
the remaining cooking time.
• During the cooking process, the mode symbols will
blink; when stopped, the symbols will stop blinking.
19. Care and cleaning
• Turn off the oven and disconnect from electrical
power before cleaning.
• Do not allow moisture to contact the control panel.
Clean it with a soft, lightly dampened paper towel.
• Keep the oven's cooking chamber clean. If pieces of
food or liquid sprays are left on the chamber walls,
remove them with a damp paper towel.
• A mild cleanser may be used if the chamber
becomes exceptionally dirty.
• Do not use abrasive cleaning instruments or wire
brushes to clean the inside or outside of the oven.
Make sure that no water or cleanser gets in any of
the ventilation or steam release openings on the top
of the microwave oven.
• Do not use ammoniabased cleansers.
• The outer surfaces should be cleaned with a damp
paper towel.
• The oven door should always be clean. Do not allow
crumbs of food to buildup between the door and
the front panel of the oven; this may prevent normal
closure of the door.
• Clean the ventilation openings on top of the oven
housing regularly  keep them free of dust and dirt.
• Regularly remove and wash the glass tray and its
base  wipe the oven chamber floor clean.
• Wash the glass tray and rotating drive mechanism in
water with a neutral soap solution. These parts are
dishwasher safe.
• Do not submerse the glass tray in cold water if it is
still hot: the sudden drop in temperature can cause
the glass tray to break.
ENGLISH
12
1656.qxd 27.06.05 14:58 Page 12

Содержание

Похожие устройства

Скачать