Hyundai H-1409 [4/15] Cassette playback

FM and FM stereo reception

· Set the BAND switch to FM position, programmer is received in mono mode.

NOTE: In particular when stereo signal is weak and much noise are received, it is preferable to receive the programmer in mono.

· Set the BAND switch to FM ST position, programmer is received in stereo mode, thus FM STEREO indicator should light up.

Cassette playback

· Slide the FUNCTION switch to TAPE position.

· Press the STOP/EJECT button to open the cassette compartment.

· Insert a cassette and push the cassette door to close the cassette compartment.

· Press the PLAY button to start the playing.

· Adjust the level and quality of sound with VOLUME knob.

NOTE:

· Press the PAUSE button to pause the playing.

· Press the STOP/EJECT button to stop the playing, press the button again to open the cassette door and you can take out the tape.

· When the tape plays to the end, playing will be stopped automatically and releases the PLAY button at the same time.

· Press the "STOP" button followed by the "REWIND" or "FAST-FORWARD" button to rewind or forward the tape at high speed.

Cassette tape recording

· Open the cassette door by pressing the "STOP/EJECT" cassette Button.

· Insert a blank cassette with the tape-side up, into the proper Guide-rails on the inside of the cassette door.

· Gently push the cassette door forward (inwards) to close it.

· Make sure the tape is fully and properly inserted before doing so.

· The set is now ready to start recording, which can be done from either the radio or CD-player.

Recording from radio

· Set the FUNCTION switch to RADIO position.

· Tune to the desired station by turning the TUNING knob.

· Press the PLAY button and RECORD button on deck simultaneously to start recording.

Recording from CD

· Set FUNCTION switch to CD position.

· Press RECORD and PLAY buttons simultaneously to start recording.

· Press the PAUSE button.

· Start the CD-player and select the exact song to be recorded.

· Release the PAUSE button to start recording.