Sinbo SBG-7101 [9/12] Using the device

- 8 -

USING THE DEVICE

Note: Since the device is equipped with a safety switch it will not operate without installing

the resistor unit to the housing.

• Remove the device out of its box.

• Remove any labels on the device and wipe the housing of the product with a damp cloth.

• Clean the tray and mesh of the device thoroughly.

• Fill the drip tray with water until it covers the bottom surface.

• Connect the plug to the mains and press the switch on the device to -I- position to

operate the device.

• Place your food on the grill.

• Turn your food upside down occasionally during cooking.

• When the cooking is complete take your food from the grill.

• For best results clean off the excessive oil on the grill with a paper towel during cooking

intervals.

Note: During initial operation fumes can be produced by heating resistor, this is a normal

condition.

CLEANING AND CARE

• Turn the On/Off key to the ‘0’ position.

• Unplug the appliance and allow it to cool down.

• Clean off the excessive oil from the grill with a paper towel.

• Dismount the resistor unit.

• Remove the drip tray from the base.

• Use damp cloth to clean the resistor unit.

• Clean the grill and drip tray in hot water with some washing up liquid using a soft cloth

or sponge.

• Reinstall the device when the parts are completely dry.

Keep instructions for future reference.

The crossed out wheelie bin symbol on this item indicates that this appliance

needs to be disposed of in an environmentally friendly way when it becomes of

no further use or has worn out. Contact your local authority for details of where

to take the item for re-cycling.