Zelmer ZIS8700 [13/96] Using your appliance

The appliance must never be placed directly under the tap to fill the water tank.

The electrical plug must not be removed from the socket by pulling the cable.

Never immerse the appliance in water or any other liquid.

Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc.)

This appliance reaches high temperatures and produces steam during use, this could cause scalds or

burns if not used properly.

Do not allow the power cable to come into contact with the soleplate when it is hot.

EUROGAMA SP. Z O. O. disclaims all liability for damages that may occur to people, animals or objects,

for the non-observance of these warnings.

Before the first use

Before using the Steam Station, please ensure you read the user manual and understand all parts and

features of the Steam Station. Be sure to remove any packaging material and labels before using for the

first time.

In the first use they can break off odors or fumes that sent quickly. Do not spray for the first time on

clothes and there may be traces of dirt on the soleplate.

USING YOUR APPLIANCE

1. Filling the water tank

Fill the water tank. Remove the water tank from the station and fill it through the water inlet cover. Do

NOT fill over the MAX level indicator (11).

Make sure when placing it back to the station that it fits correctly.

Important: Once refilled, press the button (4).

Refill the water tank when the indicator light (4) comes on. Three beeps will be heard.

Water to be used

The device is designed for use with tap water.

Important: Do not use additives!

If the water in your area is hard or semi-hard use mix tap water with distilled or demineralized water

purchased in stores, in the ratio 2:1 and 1:1 respectively (distilled water: tap water). Check with your

water supplier to determine the type of water in your area. Never use 100% distilled or demineralized,

rain water, softened water, scented water, water from other appliances such as refrigerators, air

conditioners, dryers or other types of home water preparation water.

2. Heating

1. If your steam station is equipped with an iron lock system (14), release the iron by pressing the

button.

2. Unwind the supply hose (6) and the mains cable (7). Plug mains cable into an earthed socket.

3. Turn the programme selector (1) to choose the kind of the fabric to be ironed.

4. Press the button (2) to switch the appliance on. The indicator lights (2, 16) will flash indicating that the

appliance is heating up.

5. When the iron is ready to use, the indicator light (2, 16) will remain permanently lit. Two beeps will be

heard.