Zelmer ZIS2415 [14/76] Troubleshooting guide

Zelmer ZIS2415 [14/76] Troubleshooting guide
14
PL
EN
Troubleshooting Guide
Please consult troubleshooting table below for any issues you may face prior to contacting our support
center.
Problem Possible cause Solution
Unit fails to heat up and
steam. Power indicator
light does not illuminate.
Unit is not plugged in. Plug into electrical outlet.
Water runs out of the
holes in the soleplate.
Water has condensed in
the pipes because you are
using for the rst time or
you have not used it for
some time.
Press the steam trigger away from your
ironing board until the iron produces
steam.
The soleplate is not hot
enough.
Wait until the iron soleplate is hot enough
or increase the temperature of the
soleplate.
White streaks come
through the holes in the
soleplate.
The product has a build-
up of scale because the
anti-calc cartridge has not
been changed regularly.
Change the anti-calc cartridge
Brown streaks come
through the holes in the
soleplate and stain the
linen.
You are using chemical
descaling agents or
additives in the water for
ironing.
Never add this type of product in the
water tank or in the steam chamber.
The soleplate is dirty or
brown and may stain the
garment. The clothe sticks
in the soleplate.
You are ironing at too high
a temperature.
Adjust the temperature dial to a lower
heat setting.
There is no steam or there
is little steam.
The water tank is empty. Fill the water tank.
The soleplate is not hot
enough.
Wait until the iron soleplate is hot enough
or increase the temperature of the
soleplate

Содержание

Похожие устройства

Скачать